Table Of Contents; Meaning Of Safety Signal Words; Safety - Task Force Tips SHO-FLOW 1 Instructions For Safe Operation And Maintenance

1.0 MEANING OF SAFETY SIGNAL WORDS ........................................................................................................ 3
2.0 SAFETY ............................................................................................................................................................. 3
3.0 GENERAL INFORMATION ................................................................................................................................ 4
3.1 PART IDENTIFICATION AND TERMS
3.2 SPECIFICATIONS
3.2.1 DEVICE SPECIFICATIONS
3.2.2 APP SPECIFICATIONS
3.3 COUPLINGS
3.4 USE WITH SALT WATER
4.0 INSTALLATION ................................................................................................................................................. 6
5.0 OPERATION ...................................................................................................................................................... 6
5.1 FLOW DISPLAY
5.2 DEVICE CONNECTION
5.3 ESTABLISHING A BLUETOOTH CONNECTION
5.4 SETTINGS
5.5 CALIBRATION
5.6 ESTABLISHING A BROADCASTER CONNECTION
5.7 ESTABLISHING A REMOTE VIEWER CONNECTION
6.0 MAINTENANCE .............................................................................................................................................. 14
7.0 TROUBLESHOOTING .................................................................................................................................... 14
8.0 WARRANTY .................................................................................................................................................... 15
9.0 OPERATION AND INSPECTION CHECKLIST ............................................................................................... 16

1.0 MEANING OF SAFETY SIGNAL WORDS

A safety related message is identifi ed by a safety alert symbol and a signal word to indicate the level of risk involved with a particular
hazard. Per ANSI Z535.6, the defi nitions of the four signal words are as follows:
DANGER
WARNING
CAUTION
NOTICE

2.0 SAFETY

WARNING
WARNING
WARNING
©Copyright Task Force Tips LLC 2019

TABLE OF CONTENTS

DANGER indicates a hazardous situation which, if not avoided, will result in death or serious
injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious
injury.
CAUTION indicates a potentially hazardous situation which, if not avoided, could result in minor
or moderate injury.
NOTICE is used to address practices not related to physical injury.
Equipment may be damaged if frozen while containing signifi cant amounts of water. Such damage
may be diffi cult to detect visually. Subsequent pressurization can lead to injury or death. Any time
the equipment is subject to possible damage due to freezing, it must be tested and approved for
use by qualifi ed personnel before being considered safe for use.
This equipment is intended for use by trained personnel for fi refi ghting. Use of this equipment for
other purposes may involve hazards not addressed by this manual. Seek appropriate guidance
and training to reduce risk of injury.
This device is not rated as ignition proof, explosion proof, or intrinsically safe. Use only in
locations with adequate ventilation and no hazard of fl ammable vapor buildup.
3
LIE-100 December 30, 2019 Rev04