Table of Contents
Advertisement
Quick Links
INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE
WARNING
This instruction manual is intended to familiarize fi refi ghters and maintenance personnel with the operation, servicing and
safety procedures associated with SHO-FLOW fl ow meters.
This manual should be kept available to all operating and maintenance personnel.
TASK FORCE TIPS LLC
MADE IN USA • TFT.com
©Copyright Task Force Tips LLC 2019
Understand manual before use. Operation of this device without understanding the manual and
receiving proper training is a misuse of this equipment. Obtain safety information at tft.com/
serial-number.
MANUAL: SHO-FLOW
Flow Meter Operations
3701 Innovation Way, Valparaiso, IN 46383-9327 USA
800-348-2686 • 219-462-6161 • Fax 219-464-7155
®
LIE-100 January 14, 2019 Rev00
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Task Force Tips SHO-FLOW Series
Summary of Contents for Task Force Tips SHO-FLOW Series
- Page 1 This manual should be kept available to all operating and maintenance personnel. TASK FORCE TIPS LLC 3701 Innovation Way, Valparaiso, IN 46383-9327 USA 800-348-2686 • 219-462-6161 • Fax 219-464-7155 MADE IN USA • TFT.com ©Copyright Task Force Tips LLC 2019 LIE-100 January 14, 2019 Rev00...
-
Page 2: Table Of Contents
6. Failure to follow these guidelines may result in death, burns or other severe injury. Fire and Emergency Manufacturers and Service Association FEMSA P.O. Box 147, Lynnfi eld, MA 01940 • www.FEMSA.org ©Copyright Task Force Tips LLC 2019 LIE-100 January 14, 2019 Rev00... -
Page 3: Meaning Of Safety Signal Words
This device is not rated as ignition proof, explosion proof, or intrinsically safe. Install in locations WARNING with adequate ventilation and no hazard of fl ammable vapor buildup. ©Copyright Task Force Tips LLC 2019 LIE-100 January 14, 2019 Rev00... -
Page 4: General Information
SHO-FLOW App Hose to Nozzle Hose from Truck Figure 3.0 3.1 PART IDENTIFICATION AND TERMS UNIQUE DEVICE NAME INLET THREADS OUTLET THREADS DIRECTION OF FLOW SERIAL NUMBER Figure 3.1 ©Copyright Task Force Tips LLC 2019 LIE-100 January 14, 2019 Rev00... -
Page 5: Specifications
Use with salt water is permissible provided the SHO-FLOW fl ow meter is thoroughly cleaned with fresh water after each use. The service life of the SHO-FLOW may be shortened due to the eff ects of corrosion and is not covered under warranty. ©Copyright Task Force Tips LLC 2019 LIE-100 January 14, 2019 Rev00... -
Page 6: Installation
SHO-FLOW is connected. Whenever the app is opened this screen will open as default. 1) To access this screen press the Menu button. 2) Then press the Flow Display button. ©Copyright Task Force Tips LLC 2019 LIE-100 January 14, 2019 Rev00... -
Page 7: Wireless Connection
Note: The app will remember this device name. At start up or any time it is disconnected it will automatically search and connect to that device if it is available. ©Copyright Task Force Tips LLC 2019 LIE-100 January 14, 2019 Rev00... -
Page 8: Settings
Select the Flow Units to show on the Flow Display: • GPM (Default) • LPM • Both GPM & LPM • LPS Select the Pressure Units to show for calibration. • PSI • BAR • KPA ©Copyright Task Force Tips LLC 2019 LIE-100 January 14, 2019 Rev00... - Page 9 • 60 sec Firmware Revision When connected to a SHO-FLOW the Firmware Revisions will read what code revision is currently on the board. App Revision will always be displayed. ©Copyright Task Force Tips LLC 2019 LIE-100 January 14, 2019 Rev00...
-
Page 10: Calibration
Note: If the pressure reading is out of range adjust the valve until you get a reading in the range to activate calibration option. • Always calibrate for both the low and high end fl ows to ensure the best possible accuracy. ©Copyright Task Force Tips LLC 2019 LIE-100 January 14, 2019 Rev00... -
Page 11: Maintenance
7.0 WARRANTY Task Force Tips LLC., 3701 Innovation Way, Valparaiso, IN 46383-9327 USA (“TFT”) warrants to the original purchaser of its special purpose nozzle (“equipment”), and to anyone to whom it is transferred, that the equipment shall be free from defects in material and workmanship during the fi... -
Page 12: Operation And Inspection Checklist
Operating a device that has failed the checklist is a misuse of this equipment. TASK FORCE TIPS LLC 3701 Innovation Way, Valparaiso, IN 46383-9327 USA 800-348-2686 • 219-462-6161 • Fax 219-464-7155 MADE IN USA • TFT.com ©Copyright Task Force Tips LLC 2019 LIE-100 January 14, 2019 Rev00...
Need help?
Do you have a question about the SHO-FLOW Series and is the answer not in the manual?
Questions and answers