7.2.
Memory Cache Protection Module LEDs and Button
Please refer to the following content for definitions of the LED and button behaviors.
Table 7-2
Number
1
2
3
7.3.
Host Card LED Indicator Table
XN8000D supports three optional host cards, including 10GbE via SFP+ (HQ-10G4S2), 10GBASE-
T (HQ-10G2T), or 1GBASE-T (HQ-01G4T) host cards. Please refer to the following content for
definitions of LED behaviors.
HQ-01G4T (1GBASE-T)
Number
1
2
48
© Copyright 2018 QSAN Technology, Inc. All Rights Reserved.
Descriptions of Memory Cache Protection Module LEDs and Button
Definition
Power LED:
Solid Green: Power is good at flash module.
Off: There is no power at flash module.
Status LED:
Solid Blue: The status of flash module is good.
Blinking
Blue
and
Amber
Solid
Amber:
The flash module is failed or wrong PCIe connection speed.
Attention Button:
This button has no function at XCubeNXT.
Definition
Link Status LED (Left):
Green
flashes: Asserted when the link is established, and packets are being
transmitted along with any receive activity (Access).
OFF: No link is detected, or link fails.
Speed LED (Right):
Amber: Asserted when a 1G link is established and maintained.
Green: Asserted when a 100M link is established and maintained.
OFF: No link is detected, or link fails.
Interlaced: Installing or removing the flash module.