VBM DOMOBAR Instruction Manual page 59

· Remove the steam lance (2) to the outside then put a cup
or a pot full of liquid to be heated under the lance (2).
· Fully immerse the nozzle of the steam lance into
the liquid and slowly open the valve (3) by turning it
counterclockwise.
· Once reached the desired temperature close the tap (3).
· Turn the steam lance (2) to the bowl and then make a
short dispensing to clean the inside of the jet and clean
the nozzle (2) with a damp cloth to prevent the fouling
difficult to remove.
Raise the lever (4) and perform dispensing of
water by the group to fill the boiler water
and eliminate the steam present.
3
2
4
23