VBM DOMOBAR Instruction Manual page 49

3.3,
WINGS ASSEMBLY.
Assemble the wings (1) supplied by
hooking the buttons on the wings with
the relative matching points (2) on the
machine body.
3.4,
POSITIONING THE MACHINE.
Place the machine in its final location, making sure that:
· the movable support is sufficiently strong and stable, taking into account the weight of the
machine, and that is not tilted;
· there are at least 10 cm. between the wall and rear and side walls of the machine and any
walls, to allow proper ventilation;
· the upper floor of the machine (holding surface) should not exceed 150 cm from the floor.
2
1
13