VBM DOMOBAR Instruction Manual page 57

7.5,
HOT W ATER SUPPLY.
· Press the key (1) which lights up, the water pump
starts.
· The hot water icon (A) appears on the display which
flashes during the heating phase, once the temperature
is reached the hot water icon remains fixed.
· Remove the lance (2) from the machine.
ATTENTION: The lance (2) is very hot.
Move the lance only with proper rubber
protection; Danger of scalding.
· Place a cup under the lance (2).
· Open the tap slowly
counterclockwise.
· Once you reach the desired amount, close the tap (3).
· To exit the water supply function, press the key (1)
again which goes off.
ATTENTION: Do not leave for a long time
the key (1) on, the water pump continues
to operate by pumping water in the boiler.
Leave inserted the key (1) the time required
for the hot water supply.
turning the knob (3)
A
1
3
2
21