Cisco Meraki Mr52; Eero Mesh Network - Hunter Hydrawire Owner's Manual

Turn SON "Off"
4.

Cisco Meraki MR52

Model: Cisco Meraki MR52
Manufacturer: CISCO
Device: Wireless/Networking Business WAP "Wireless Access Point"
Issue: Due to the latest product and drivers not yet being supported, Hydrawise controllers
are unable to connect to this wireless access point.
Resolution: You can log into the access point and will need to create a guest SSID.
Choose to have a password or not password encrypted, make it a standalone 2.4 g
connection, and set a WPA/WPA2 encryption. The controller will now connect to the cloud
as it normally should. Learn More

eero Mesh Network

Model:
All Models
Manufacturer: eero
Bridged Access Points - Mesh networks need to have their access points (AP) bridged so
the IP allocation from the DHCP server match. This can be an issue with the IP the
controller receives from the AP and DNS server which will cause the DNS to fail when
doing a network test. LEARN MORE
Bridge your eero devices by using following the instructions below:
.
[4]
[5]
Copyright 2021 Hunter Industries. All Rights Reserved. 6