Configuring The Security Type; Setting Your Password - Hunter Hydrawire Owner's Manual

Each time you touch a wireless name the signal strength will be shown at the bottom of the
screen.
If your wireless router is not shown then check the following –
Your Hydrawise controller is within range of your wireless.
Your access point is configured to accept connections from 802.11b/g wireless clients.
If your wireless router is hidden you may manually enter it by selecting Manually enter
wireless and typing in the name.

Configuring the security type

The security type configured on the controller must match the security type configured in
your wireless router. The Hydrawise unit can attempt to automatically detect this if you
choose Auto Detect as the security type.
Hydrawise supports the following security types –
Auto Detect
Open
WPA2
WPA Personal
WPA Auto
After choosing the security type press the Confirm button.

Setting your password

For any security mode (except for Open) your wireless router password must be entered.
Wireless passwords are a minimum of 8 characters and are case sensitive.
Copyright 2021 Hunter Industries. All Rights Reserved. 14