Viewing Wireless Settings; Configuring Wireless Name - Hunter Hydrawire Owner's Manual

Viewing Wireless Settings

From the Home screen, navigate to the Wireless Settings by pressing Settings, then
Wireless.
To successfully connect the Hydrawise unit to your wireless router, you will need to
correctly select your wireless router, wireless security mode and enter your wireless
password.
The current status of the controller's connection to your wireless router is shown at the top
of the screen. The controller will automatically attempt to connect to the configured access
point if a connection is lost (for example, after power failure).
Touch on any of the green buttons to change the wireless type, security type or password.

Configuring Wireless Name

Touching the currently configured Wireless Name will automatically start a scan of all local
wireless routers and allow you to choose a new one.
After about 5 seconds a list of found wireless networks will be listed. To select a wireless
name, touch on the wireless name and then touch Confirm. Do not press the Home or
Back buttons after selecting your wireless router name – these options will not save your
router name.
Copyright 2021 Hunter Industries. All Rights Reserved. 13