No Recent Contact/Phone Not Connecting - Hunter Hydrawire Owner's Manual

Upon successful connection the wireless status will show Connected. If your controller fails
to connect to your wireless router check the following –After entering your wireless settings
the controller will connect to your access point. The connection process takes about 30
seconds.
Your password is entered correctly. It is case sensitive and must be at least 8
characters long.
Check that the wireless security types match between the controller and your wireless
router. Hydrawise recommends use of WPA2 security between the controller and your
wireless router.
No Recent Contact/Phone Not
Connecting
This message indicates the controller is not connected to Hydrawise. We detect this within
about 7 minutes so this would be a connectivity problem for controllers with firmware
versions 3.00+. If you have the X2 controller with WAND WiFi Module, please use the
troubleshooting section here
NOTE: It takes 7 hours for a Hunter HC indoor controller with version 1.89 or 2.05 to
.
[12]
Copyright 2021 Hunter Industries. All Rights Reserved. 16