Mounting The Scanner Standalone; Scan Engine Electrical Connections; Host Interface - Datalogic Gryphon GFE4400 Integration Manual

Fixed area imaging bar code scan engine

Hide thumbs Also See for Gryphon GFE4400:

Table of Contents

Mounting the Scanner

Mounting the Scanner Standalone

The OEM scanner is not intended for use in a standalone application.

This model is intended to be integrated inside a host enclosure.

GFS4400 models should be used when a standalone application is re-

quired.

The GFE4400 scan engine has three application ports for device integra-

tion, as indicated below, a Host (J1), User (J2), and Good Read Beep In-

terface.

Figure 1. Scan Engine Application Ports

J3 Beep Interface

J2 User Interface

J1 Host Interface

The Host Interface connection (J1) provides all the connection points for

either RS-232 or USB host communications. Additionally, this connec-

tor is input for power and provides access to the external triggering input

and digital signal output functions. The assignment of the connector

pins are indicated in

Table 1

on page 6.

Integration Guide

Table of Contents