Mounting The Scanner (Optional) - Datalogic Magellan 800i Quick Reference Manual

The Magellan 800i utilizes illumix™ intelligent illumination technol-
ogy to optimize light levels for a variety of bar code scanner func-
tions including automatic reading of bar codes from printed
surfaces, mobile devices and image capture in variable contrast
environments.

Mounting the Scanner (Optional)

The scanner can be permanently attached to a wall or countertop
as follows:
1. After identifying an optimal position for the scanner, cut
out and securely hold the screw hole template (located on
the inside back cover) in the desired position matching the
scanner's footprint.
2. Mark the center of both screw locations using a pencil or
marker and remove the template.
3. If necessary, drill pilot holes in the marked positions, then
thread two pan head
ing their heads protruding approximately 1/8" (3mm)
above the counter or wall surface.
4. Align the larger ends of the keyholes located on the scan-
ner's bottom with the protruding screw heads, then push
down and rotate clockwise to lock the scanner in position.
1. The screw heads must fit inside the larger end of the keyholes on the
bottom of the scanner.
2
1
, self-tapping screws in place, leav-
Magellan 800i
TM