Usb 3.0 Port - Motorola MG8702 Quick Start Manual

USB 3.0 PORT

A USB 3.0 port is located on the back of the MG8702, which can be
used for File Sharing by the devices on your local network.
1. Log in to the Configuration Manager (see Configuration Manager
section above). Navigate to Advanced > Advanced Router > File
Sharing. If it isn't already checked, click the Enable checkbox for
Windows File Sharing (SAMBA), and click Save.
2. Plug your USB flash drive into the MG8702 device USB port.
3. In Windows:
Make sure you have Network Discovery and File Sharing enabled in
Network Sharing on your computer. Open File Explorer (Windows
Explorer) and type \\192.168.0.1 in the address bar. Press Enter. This
will open your USB flash drive directory, giving you access to read/
edit its content.
In MacOS:
On the Finder menu, navigate to Go > Connect to Server. In
the address bar, type smb://192.168.0.1 and then press Enter. If
prompted by an authentication dialog box, select Guest and click
Connect, then OK. This will open your USB flash drive directory,
giving you access to read/edit its content.
13