Motorola MG8702 Quick Start Manual page 11

If you want to keep your current network name and password
within the Configuration Manager:
1. Follow the instructions on the Wireless Initial Setup page to enter
the network name and password for your original network, paying
close attention to the upper and lower case characters. You may
have a wireless network name and password for the 2.4 GHz band
only, or both the 2.4 GHz and the 5 GHz bands.
2. Press Save. You will see a screen confirming your settings. If needed,
you can correct the settings and press Save again.
Note: If your previous network name was 5 characters or less, or the
wireless password was 7 characters or less, you cannot change the
Motorola password to match your previous network.
If you encounter a problem, please see the Troubleshooting Tips on
page 15.
For more detailed information about the MG8702 device please see
www.motorolanetwork.com/MG8702.
11