Perkins 1200F Series Supplement Manual page 2

This manual has been compiled to explain mandatory requirements, provide information for designers
and provide information on the application and installation of the 1204F Perkins engines into Industrial
equipment, to meet U.S. Environmental Protection Agency ("EPA") Tier 4 Final regulatory
requirements and European Union ("EU") Stage IV non-road mobile machinery emissions legislation.
We endeavour to provide information in this manual that is correct at the time of issue. Continuing
product developments and changing legal requirements will, however, continue to drive further
changes in installation requirements and therefore attention must be paid to ensure that the latest
information is utilised and valid data is obtained from the engine specification manual.
This manual is not an exhaustive source of instruction or data and should only be used in conjunction
with advice from your local application engineers, sales manager and or technical support
representative.
The following media publications for the relevant engine type should also be used for further technical
information:
•
Tier 4 Final Mechanical A and I manual – TPD1830
•
Tier 4 Final Electrical and Electronic A and I Manual – TPD1836
•
Operator and maintenance manual (OMM)
•
System Operation Test and Adjust (SOTA)
•
Specifications (Specs)
•
Disassembly and Assembly (D&A)
•
Engine Specification Manual (ESM)
•
Customer Assembly Requirements (CAR)
Correct practices, procedures and safety precautions should always be followed.
Please note:
The information provided may be subject to change.
Perkins has provided this information in good faith and are not liable for how this information is
interpreted or applied.
Perkins is not responsible for failures resulting from attachments, systems, accessory items, and
parts not sold nor approved by Perkins. Consult the applicable warranties for complete details of
Perkins warranty coverage.
The manufacturer and customer are reminded that it is their responsibility to ensure compliance with
the requirements of the Health & Safety at Work Act 1974 and any other applicable legislation, both
nationally and internationally, in relation to the engine installation applicable to the equipment
concerned. In giving notice of approval in respect of the installation, Perkins do not assume such
responsibilities on behalf of the manufacturer or customer and while engine installation approval and
advice is an opinion given in good faith, the equipment manufacturer and customer remain
responsible as detailed above and must act and insure accordingly.
Contents
A&I manual Publication TPD 1832 – Production issue 3.
1204F - DEF System Supplement
Page 2 of 41