Intended Use - Bosch ConnectS2 User Manual

Connect S2 | Solar Frame | User Guide 33 | 39

14 Intended Use

The housing of the Connect Gateway must not be opened or manipulated. The Connect Gateway is designed for use in
environmental conditions as described in the Technical Data section. Any intention to use the device under deviating
environmental conditions is subject to re-testing and must be tested by the customer.
Neither the Connect Gateway nor any potential product derivatives have been planned, developed, or approved for use as
system components for body surgical implants, other life-support applications, or other applications where a defect in the
Bosch product could cause personal injury or death. The same applies to any type of weapon or device or application that
could potentially endanger people.
The Connect Gateway is designed for monitoring and tracking and, according to the Machinery Directive 2006/42/EC, should
not be used for the control and safety of machinery.
Bosch Connected Industry is not liable for any damage caused by using the Connect Gateway outside of the tested operating
modes and/or the specified application area.
Radio frequency radiation exposure information: this equipment complies with the radiation exposure limits prescribed for an
uncontrolled environment in fixed and mobile application conditions. This equipment was not designed as a portable radio
device. The device should be mounted and operated at a minimum distance of 20 cm between the radiator and the user's
body or persons in the vicinity.
© Robert Bosch Manufacturing Solutions GmbH Bosch Connected Industry