Intended Use - Bosch Connect S Manual

Connect S | Connect L | Asset Monitoring and Tracking Gateway 10 | 13
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.

10 Intended Use

The housing of the Connect gateway is not to be opened or tampered with. The Connect gateway is designed for use
within environmental conditions as further detailed in the technical specifications in chapter 2. Any intent to use or operate
the product under deviating environmental conditions must be subjected to renewed validation and testing by the customer.
Neither the Connect nor a potential product derivation, are designed, intended, or authorized for use as components in
systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other
application in which the failure of the Bosch product could create a situation where personal injury or death may occur. The
same applies for any kind of weapon, or any device or application which is potentially dangerous to human life.
The Connect gateway is designed for monitoring and tracking purposes and shall not be used as an element of control and
safety in machines under the scope of the Machinery Directive 2006/42/EC.
Bosch Connected Industry shall not hold liable for any damages resulting from any use of the Connect gateway
outside/beyond the certified types of operation and/or defined field of application.
Radio frequency radiation exposure information: this equipment complies with the radiation exposure limits prescribed for
an uncontrolled environment for fixed and mobile use conditions. This equipment is not designed as a portable cellular
radio device and should be installed and operated with a minimum distance of 20cm between the radiator and the body of
the user or nearby persons.
Data subject not change without notice | Printed in Germany | June 06, 2016 | DRAFT Bosch Connected Industry