Safety Notes; Safety Instructions For The Integrated Battery; Safety Instructions For Installation; Safety Instructions For Mounting With Magnets - Bosch ConnectS2 User Manual

Connect S2 | Solar Frame | User Guide

15 Safety notes

Safety instructions for the integrated battery

CAUTION
The device contains a lithium battery. Improper handling of the battery may cause a fire.
 Do not damage or cut the device.
 Observe the notes on handling and transport in chapter 11.
 Observe the notes on disassembly and return in chapter 12.


Safety instructions for installation

WARNING
Only use the device if it can be ruled out that persons or property will be harmed by the way it is
attached.
The permanent fixation for the respective application must be ensured. Only use the device if the
method of attachment rules out the possibility of personal injury or damage to property.
 Installation ONLY by qualified personnel.
CAUTION
The supplied mounting material (nuts, washers, etc.) is used for the correct installation of the
solar frame and gateway.

The mounting surface must be even and must not be heavily soiled so that the Solar Frame rests
evenly.
 Ensure a flat and clean surface.

Safety instructions for mounting with magnets

CAUTION
For safety reasons, attachment with magnets is only permitted up to a maximum height of
2 meters.

 Select an alternative mounting method for higher mounting positions.
WARNING
When mounting on vehicles, mobile machines or other moving objects, high accelerations can
affect the device. In these cases, mounting the device with the mounting magnets is not
permitted.
 DO NOT attach the gateway to the outside of moving objects such as trucks, trailers, cars or
© Robert Bosch Manufacturing Solutions GmbH
Only use the device in the specified temperature range, see chapter 10.
Only use the supplied mounting material.
Observe the maximum height of 2 m.
other vehicles using the magnets.
34 | 39
Bosch Connected Industry