General Information - Bosch ConnectS2 User Manual

Connect S2 | Solar Frame | User Guide

3 General information

Before using the Connect S2 Gateway, please familiarize yourself with the
observe the safety instructions to ensure safe installation, operation and disposal.
Various accessories and mounting materials are available for the Connect S2 Gateway for many different applications. The
chapter Sets, accessories, mounting material and ordering
The Connect S2 supports a variety of functions and configuration options. Bosch delivers pre-set Connect S2 to the
customer to make commissioning as easy and quick as possible. When ordering, the customer selects the desired
configuration of the Connect S2, see chapter
We recommend that the unit be switched on before installation. Follow the instructions for
Connect S2 the Connect S2 on page 14.
There are various options for mounting the Connect S2 on a moving object or at a fixed location. Depending on the location
and the local conditions, different mountings are possible. Details are described in chapter
The Connect S2 works self-sufficiently and largely maintenance-free. The instructions for
24, should be observed.
For questions and if help is required, there is a Support, page 24.
An overview of all technical data for the Connect S2 Gateway and the solar support (accessories) can be found in the
chapter Technical data, page 25.
For greater safety, the Connect S2 uses an integrated battery with lithium iron phosphate technology (LiFePO4). As this is
lithium technology, the current regulations for
handling, transport and use.
At the end of use, the Connect S2 must be correctly disassembled and returned. All details are described in chapter
Disposal, page 31.
When using a Connect S2, the legal requirements of the respective countries of use must be observed and the intended
use must be observed, see chapters
© Robert Bosch Manufacturing Solutions GmbH
information, page 8, provides an overview of all options.
Functions and configurations, page 12.
Handling and transport, page 28, must nevertheless be observed during
Certifications and regulatory
Safety notes
Mounting
Operation and
Notes, page 32 and Intended
7 | 39
on page 34. It is important to
Activation and coupling of the
on page 15.
maintenance, page
Use, page 33.
Bosch Connected Industry