Table of Contents
Advertisement
Drive Modes
Driving mode selector
The [Field] and [Road] modes are selected from the 5 positions on the driving mode selector.
1. [FIELD] modes.
2. [ROAD] mode.
The [Field] modes are managed by the Plus+One computer. In these modes, you must manually adjust the engine speed
using the "Engine throttle switch" on the console (#22, "Engine throttle switch" on page 22).
In [Road] mode, the computer directly controls the engine speed based on the position of the multi-function Grip handle
or foot pedal, depending on which controller is selected.
The responsiveness of the acceleration and deceleration of the SARITOR are predefined in the Plus+One computer. To
change the driving mode behavior, see "Drive mode behavior" on page 42.
ATTENTION! When any of the [Road] or [Field] modes are selected, the access ladder to the cab raises automatically.
[Road] mode controller
While in [Road] mode, the movement of the SARITOR can be controlled
using either the Grip handle or foot pedal (automotive).
Symbol (2) indicates which controller is selected.
To change the controller:
• Place the Grip handle in the neutral position.
• Press button (1) to change which controller is used.
If the foot pedal is selected, the Grip handle determines the direction of
travel.
• Handle forward = Forward travel when foot pedal is pressed.
• Handle back = Reverse travel when foot pedal is pressed.
ATTENTION! Changing the controller is only possible while the Grip handle is in the neutral position.
÷
Note: The foot pedal is not active in [Field] mode.
÷
Note: The default controller option is the Grip handle.
5 - Operation
1
2
P
P
15
rpm x100
15
1
P_01_075_HAE.eps
2
37
Advertisement
Table of Contents
