Ide Hdd Auto Detection - QDI PENTIUM II P6I440EX/ATX EXCELLENT 1 Manual

Hide thumbs

Table Of Contents

Table of Contents

Type the password, up to eight characters, and press <Enter>. The password

typed now will clear any previously entered password from CMOS memory.

You will be asked to confirm the password. Type the password again and

press <Enter>. You may also press <Esc> to abort the selection and not enter

a password.

To disable password, just press <Enter> when you are prompted to enter

password. A message will confirm the password being disabled. Once the

password is disabled, the system will boot and you will be able to enter Setup

freely.

If you have selected "System" at "Security Option" of "BIOS Features Setup"

Menu, you will be prompted for the password every time the system is

rebooted or any time you try to enter "CMOS Setup".

If you have selected "Setup" at "Security Option" of "BIOS Features Setup" Menu,

you will be prompted for the password only when you try to enter "CMOS Setup".

Supervisor Password has higher priority than User Password. You can use

Supervisor Password when booting the system or entering "CMOS Setup" to

modify all settings. Also you can use User Password when booting the system or

entering "CMOS Setup" but can not modify any setting if the Supervisor Password

is enabled.