QDI PENTIUM II P6I440EX/ATX EXCELLENT 1 Manual page 24

Table of Contents

Advertisement

Intorduction
Use NS Plug & play I/O chip PC87309
One floppy port supports up to two 3.5"or 5.25" floppy drives
360K/720K/1.2M/1.44M/2.88M format.
Supports LS-120 floppy disk drive
All I/O port can be enabled/disabled by the BIOS setup
Two high speed 16550 fast compatible UART (COM1/COM2/COM3
/COM4 selective) with 16-byte send/receive FIFOs and supported MIDI
mode.
One enabled parallel port at the I/O address 378H/278H/3BCH with
additional bi-direction I/O capability and multi-mode (SPP/EPP/ECP)
(IEEE1284 compliant).
Provides protection circuit to prevent damage to the parallel port when
a connected printer is powered up or operate at a higher voltage.
Advanced Feature
On board W83781D support system monitoring(monitor system
voltages, chassis intrusion and FAN speed) (Optional)
Supports LDCM(LanDesk Client Manager) software (Optional)
On board PS/2 mouse and PS/2 keyboard socket
Two USB ports
On board switching voltage regulator with VID (support1.3V to 3.5V)
Provides Anti-Virus function
Provides Infrared interface
Supports Windows 95 Software Power-Down
Supports External Modem Ring Power-On
Supports Auto Fan off when the system enters suspend mode
Supports wake up on LAN function
BIOS
Licensed advanced AWARD BIOS, Supports Flash ROM BIOS, Plug
and play ready. Built-in NCR®53C810 BIOS
Supports IDE CD-ROM or SCSI boot up
Expansion slots
3 x ISA slots and 3 x PCI slots
1 AGP Slot
Board size: 305mm x 175mm
1 - 2

Advertisement

Table of Contents
loading

Table of Contents