Power Led Connector; Green Led Connector; Hardware Green Connector; Infrared Header - QDI PENTIUM II P6I440EX/ATX EXCELLENT 1 Manual

Connector Configuration
*Note: If you change "soft-off by PWR-BTTN" from default "Instant-off" to "Delay 4
Secs", the power button should be pressed for more than 4 seconds before the system
power down. For details, please refer to Page 3-10.
Power LED Connector (PWR_LED)
PIN NUMBER
1
2
3
4
5
The LED connected to "PWR LED" will light slightly when the system is in
standby status.
Green LED Connector (GREEN_LED)
PIN NUMBER
1
2
3
Hardware Green Connector (SLEEP)
SETTING
CLOSE ONCE
OPEN
Infrared Header (IRDA)
PIN NUMBER
1
2
3
4
5
6
Controlled Fan Connector(CPU FAN,CHS FAN)
Power-LED Green LED SLEEP IRDA
2 - 2
FUNCTION
LED ANODE
LED CATHODE/GND
LED CATHODE/GND
NC
LED CATHODE/GND
FUNCTION
LED ANODE
LED CATHODE/GND
LED CAHODE/GND
FUNCTION
HARDWARE GREEN
NORMAL
FUNCTION
VCC
NC
IRRX
GND
IRTX
VCC