Call Forward; Call Conference; Speed Dial; Voice Message - Yealink SIP-T23G Quick Start Manual

COGECO BUSINESS | YEALINK W52P IP DECT CORDLESS PHONE

Call Forward

Call Conference

Tips: You can split
the conference call
into two individual
calls by pressing the
Split soft key.

Speed Dial

Voice Message

To enable call forwarding, dial feature code *72 followed by the number you want
to forward your number to.
To disable call forwarding, dial feature code *73.
1. Press the Conf soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press the Send soft key.
3. Press the Conf soft key again when the second party answers.
All parties are now joined in the conference.
4. Press the EndCall soft key to disconnect all parties.
To configure a speed dial key:
1. Press the Menu soft key when
the phone is idle, and then select
Features->DSS Keys.
2. Select the desired line key, and
then press the Enter soft key.
3. Select Speed Dial from the Type
field, select the desired line from
the Account ID field, enter a
label in the Label field and enter
the number in the Value field.
4. Press the Save soft key to accept
the change.
Message waiting indicator on the idle screen indicates that one or more voice
messages are waiting at the message center. The power indicator LED slowly
flashes red and the MESSAGE key LED lights up.
To listen to voice messages:
1. Press or the Connect soft key.
2. Follow the voice prompts to listen to your voice messages.
To use the speed dial key:
Press the speed dial key to dial out
the preset number.
5