Subscribe to Our Youtube Channel
Related Manuals for Roger RUD-2
Summary of Contents for Roger RUD-2
- Page 1 U S B P r o x i m i t y R e a d e r R U D - 2 v 2 . 0 Document version: Rev. A Firmware version RUD-2_fv2.0.4 U s e r s M a n u a l...
- Page 2 USB port which is also used for communication with the device. The RUD-2 can be used as card enroll reader for access control system or any other application which requires card reader. Card can be enrolled straight from the PR Master (version 4.4.8 is required) or using dedicated Roger MiniReader 1.1.3 application.
- Page 3 W o r k i n g w i t h o t h e r p r o g r a m s Support for RUD-2 readers can also be implemented in other programs. To do this you need to use a DLL library provided by reader’s manufacturer. In this case, the logic of reader handling depends completely on the program’s author.
- Page 4 Optionally, the RUD-2 can be connected to computer by other USB cable of a length not exceeding 5 meters. However any modifications of original USB cables are prohibited.
- Page 5 RUD-2 v2.0 EN Rev. A.doc 2012-08-03 Technical Data Power supply 5 VDC directly from the USB port Average current consumption 80 mA EM 125 KHz (EM 4100/4102 compatible) proximity Cards transponders Up to 8 cm for ISO cards (while in an optimal relative...
Need help?
Do you have a question about the RUD-2 and is the answer not in the manual?
Questions and answers