Table of Contents
Advertisement
3-8
Figure 3-7.
3.3.3
Lever adjustment
The control lever feel can be adjusted by means of adjusting screws on the
forward face of the control head.
• The friction drag on the lever is adjusted with the throttle friction adjuster
screw (see figure 3-4 or figure 3-7). Turn the screw clockwise to increase
the friction on the lever, counter-clockwise to reduce the friction.
• The force required to move in and out of the shift detents is adjusted with
the Shift Detent adjuster screw. The detents are meant to prevent
accidental gear engagement, so bear that in mind as you make
adjustments. Clockwise increases force, counter-clockwise decreases.
Figure 3-8. Control Head lever positions.
SHIFT
DETENT
THROTTLE
FRICTION
Adjusting
Screws
EN
Advertisement
Table of Contents
