Table of Contents
Advertisement
Figure 3-2.
EN
ENGINE TRIM CONTROL (OPTIONAL):
Provides simultaneous trim control of all engines.
LEVER POSITION
INDICATORS
NEUTRAL INDICATOR LAMPS:
These lamps have four states:
Steady green – engine is in neutral
Slow flashing green (0.5s on, 0.5s off) – Neutral
Throttle Warmup is engaged
Very slow flashing green (1s on, 2s off) – Trolling Mode
is engaged
Fast flashing red – A danger fault is active
See section 4.
INDICATOR DIMMING FEATURE:
When the control head is active, pressing
Take Command repeatedly will cycle through
five available indicator brightness levels.
TAKE COMMAND BUTTON AND LAMP:
Used to activate a control head.
To take command with a control head:
• Put control levers in neutral and press Take Command.
• The adjacent lamp signals the transfer status as follows:
Steady blue – station is active and in control of shift and throttle.
Flashing blue – station transfer from one station to another is underway.
You have five seconds to match the control lever positions with those of the
active station to complete the transfer.
Fast flashing blue – A warning fault is active. See section 4.
Lamp off – station is inactive
NOTE
If the lamp does not come on when you press Take Command, Station
Protection may be enabled. See section 3.3.4.
3-3
Advertisement
Table of Contents
