Electric Panel - Riello P200 T/G Installation, Use And Maintenance Instructions

ELECTRIC PANEL

Hourcounter
Deducting the number of hours of 2
could know how many hours the burner has been performing only at 1
performance hours of the 2
nozzle hourcounter -. The hours of 3
Commutator
Pos. 0: Burner stop
Pos. 1: Burner operation only at 1
Pos. 2: Burner operation at 1
Pos. 3: Burner operation at 1
MOTOR LOCK-OUT
It is caused by the overload relay in case of overload or no electric supply.
Push the proper reset button (after removal of the protective cover).
5906
nd
nozzle hourcounter from those indicated in the 1
nd
stage alone - deduct from the 2
rd
stage operation are shown rightly on the 3
st
stage
st nd
and 2 stage
st nd rd
, 2 and 3 stage
st
1 nozzle hourcounter with
operation signal
nd
2 nozzle hourcounter with
operation signal
rd
3 nozzle hourcounter with
operation signal
Motor lock-out signal
4 position commutator
Control box lock-out signal
with re-set push-button
st
stage; the same procedure to detect the
nd
stage hourcounter the hours indicated in the 3
10
st
nozzle hourcounter you
rd
nozzle hourcounter.
rd