Table of Contents
Advertisement
General information
1
General information
Before installing the VAC read these instructions carefully. It is the basis
Use and
for any action when dealing with the VAC, and may be used for training
storage
purposes. The instructions should be subsequently stored at the operation
site.
Target group
The target group for these instructions is technical staff, who have basic
knowledge in pneumatics and mechanics.
Only complying technical staff may work on the VAC.
The VAC may only be installed, put into operation, maintained, troubleshot
and disassembled by persons authorised by the operator.
Copyright
This documentation is protected by copyright.
Netter
production of the instructions, as well as parts thereof.
Limitation of
All technical information, data and instructions for installation, operation
liability
and maintenance in these instructions are based on the latest information
available at the time of printing and take our past experience to the best of
our knowledge into account.
No claims can be derived from the information, illustrations and descrip-
tions in these operating instructions.
The manufacturer does not assume liability for damages resulting from:
• failure to observe the instructions,
• improper use,
• unauthorised repairs,
• technical modifications,
• use of non-permissible spare parts.
Translations are made to the best of our knowledge.
Netter
translation was made by us or on our behalf. Only the original German text
remains binding.
Directives /
The vacuum mounts of the series VAC comply with the EC Machinery Di-
standards
rective 2006/42/EC.
observed
In particular, the standard EN ISO 12100 has been observed.
Vibration reserves all rights such as translations, reprinting and re-
Vibration does not assume liability for translation errors, even if the
3
Advertisement
Table of Contents
