Home Decorators Collection PPLNKDCG24D Use And Care Manual

TOOLS REQUIRED
Hammer Safety goggles
Measuring tape Wall hardware
Installation
1

PREPARING FOR INSTALLATION

NOTE: Before installation, make sure all parts are present. Compare parts with
the Hardware Included list. If any part is missing or damaged, do not attempt to
install the product.
□ Determine the desired mounting location, and mark the wall where the unit
will be installed.
NOTE: For secure installation, the unit must be mounted to at least one wall stud.
2

CUTTING THE OPENING FOR PLUMBING FIXTURES

NOTE: This step applies to vanity cabinets with full back panels only.
□ Locate and mark plumbing on the back panel.
□ Drill a pilot hole through the back panel.
□ Use a keyhole saw to cut an opening for the plumbing fixtures.
3

POSITIONING THE CABINET

□ Move the cabinet into place, and use wood
shims to level the cabinet against the wall.
Use and
Care Guide
Vanity Combo
Phillips screwdriver Power drill
Caulk/sealant
Model# PPLNKDCG24D
Model# PPLNKDVR24D
Model# PPLNKWHT24D
Model# PPLNKDCG30D
Model# PPLNKDVR30D
Model# PPLNKWHT30D
Model# PPLNKDCG36D
Model# PPLNKDVR36D
Model# PPLNKWHT36D
HARDWARE INCLUDED
AA - Knob x 3
Level
4

BEFORE BEGINNING ASSEMBLY

□ Read directions thoroughly
□ Decide on right or left hand door configuration
□ Perform door / drawer swap prior to vanity installation.
Item# 1003 619 898
Item# 1003 619 905
Item# 1003 619 907
Item# 1003 619 896
Item# 1003 619 906
Item# 1003 619 897
Item# 1003 619 902
Item# 1003 619 900
Item# 1003 619 901
BB - Screw x 3
HOMEDEPOT.COM
Please contact 1-888-774-8062 for further assistance.