Table of Contents
Advertisement
Quick Links
1006152685/316091776/23MMP90586-PD01
1006152681/316091778/23MMP90586-PG76
1006152683/316091777/23MMP90586-TPO98
1006335689/316091776/23MMP90586-PD01H
USE AND CARE GUIDE
KERRINGTON ELECTRIC FIREPLACE MEDIA MANTEL
QUESTIONS, PROBLEMS, MISSING PARTS? BEFORE RETURNING TO THE STORE,
CALL HOME DECORATORS COLLECTION CUSTOMER SERVICE
MONDAY - FRIDAY 8 A.M. - 7 P.M. EST, AND SATURDAY 9 A.M. - 6 P.M. EST.
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
THANK YOU
We appreciate the trust and confidence you have placed in Home Decorators through the purchase of this electric fireplace. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Home Decorators!
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Home Decorators Collection 23MMP90586-PD01
Summary of Contents for Home Decorators Collection 23MMP90586-PD01
- Page 1 USE AND CARE GUIDE KERRINGTON ELECTRIC FIREPLACE MEDIA MANTEL QUESTIONS, PROBLEMS, MISSING PARTS? BEFORE RETURNING TO THE STORE, CALL HOME DECORATORS COLLECTION CUSTOMER SERVICE MONDAY - FRIDAY 8 A.M. - 7 P.M. EST, AND SATURDAY 9 A.M. - 6 P.M. EST. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS...
-
Page 2: Table Of Contents
Table of Contents Maximum Load Warning ........... 2 Package Contents .............. 8 Safety Information ............. 3 Assembly ..............9 Warranty ..............5 Operation ..............23 Pre-Assembly ............. 6 FCC/IC Information ............26 Hardware Included ........... 6 Care & Cleaning ............26 Product Specifications ............ -
Page 3: Safety Information
Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any question regarding the product, please call customer service at 1-800-986-3460, 8 a.m.-7 p.m., EST, Monday-Friday, WARNING: Under no circumstances should this fireplace be 9 a.m. - Page 4 Safety Information (continued) NOTE: Use care in assembling your new fireplace. Take your time and use the hardware provided and a quality Phillips head screwdriver. Never overtighten bolts. • Do not sit on any part of the mantel. NOTE: To avoid injury from unexpected starting or electrical shock, do not plug the power cord into a source of power during unpacking and assembly.
-
Page 5: Warranty
Warranty Warranty 1 Year Limited Warranty: The manufacturer warrants that your new Electric Fireplace is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations. Install and operate this appliance in accordance with the installation and operating instructions furnished with the product at all times. -
Page 6: Pre-Assembly
Pre-Assembly HARDWARE INCLUDED Part Description Part Number Quantity Plastic Connector Block PH-PCB XXX005 Bolt 6.3 x 12 mm PH-BLTBLK002 Bolt 6.3 x 32 mm P23MMP90586-CC 16 mm washer PH-WSRZNC002 USB output 980# Screw 3 x 12 mm PH-SCRBLK004 Magnet with single spring PH-MTLBLK001 Screw 3.5 x 15 mm PH-SCRBLK015... -
Page 7: Product Specifications
Pre-Assembly REPLACEMENT PARTS Part Description Part Number Quantity Floor Glide PH-GLDBRW001 Metal Plate PH-PLTBLK001 NOTE: Hardware not shown to actual size. PRODUCT SPECIFICATIONS VOLTAGE 120VAC, 60 Hz AMPS 12.5 Amps WATTS 1500 Watts USB INPUT 5VDC / Max 2.4 Amps USB OUTPUT 5VDC / Max 2.4 Amps PLANNING ASSEMBLY... -
Page 8: Package Contents
Pre-Assembly (continued) PACKAGE CONTENTS NOTE: All panels are labeled left and right as viewed from the front of unit. Part Description Quantity Bottom Shelf Base Left Side Rail Base Back Rail Base Right Side Rail Base Front Rail Decorative Base Panel Top Panel Center Shelf Left Partition... -
Page 9: Assembly
Assembly Preparing the base Locate the Base Rails (B, C, D, E) and place on a flat surface. Insert Bolts (BB) through the two-hole Plastic Connector Blocks (AA) on each rail as shown. Tighten with the Phillips screwdriver. Connecting the base panels Align the Base Left Side Rail (B) with the Base Back Rail (C) and push together. - Page 10 Assembly (continued) Attaching the front base panel Align the Base Front Rail (E) with the previously assembled base rails from step 2. Secure with Bolts (BB) using a Phillips screwdriver. Assembling the base Locate the Bottom Shelf (A) and place upside down on a flat surface.
- Page 11 Assembly (continued) Attaching the decorative base panel Locate the Decorative Base Panel (F). Insert Bolts (CC) through the Flat Washers (DD) to secure the Decorative Base Panel (F). Tighten with a Phillips screwdriver. Installing the USB port Locate the Center Shelf (H). Slide the USB output (EE) through the opening in the Center Shelf (H).
- Page 12 Assembly (continued) Attaching the door catch Locate the Left Partition (I) and the Right Partition (J). Attach the Magnetic Spring Door Catches (GG) to the Left Partition (I) and the Right Partition (J). Secure each catch using Screws (HH) where indicated by the diagram.
- Page 13 Assembly (continued) Attaching the base Align the holes on the edges of the Center Assembly (H) with the holes on the Bottom Shelf (A). Insert Screws (II) through the Bottom Shelf (A) and into the pre-drilled holes on the edges of the center assembly as shown. Securely tighten all screws using a Phillips screwdriver.
- Page 14 Assembly (continued) Attaching the side panels Align the Left and Right Side Panels (K and L) with the Bottom Shelf (A). Insert Screws (II) through the Bottom Shelf (A) and into the pre-drilled holes on the edges of the Left and Right Side Panels (K and L) as shown.
- Page 15 Assembly (continued) Attaching the top front rail Align the plastic connector blocks on the Top Front Rail (P) with the pre-drilled holes on the Right Partitions (I and J) and Side Panels (K and L) . Secure the Top Front Rail (P) to the Side Panels (K and L) by screwing Bolts (BB) through the plastic connector blocks and into the pre-drilled holes on the Side Panels (K and L).
- Page 16 Assembly (continued) Attaching the top panel Place the Top Panel (G) on top of the main assembly while aligning the pre-installed screws with the screw holes on the edges of the main assembly. After inserting the screws (BB) into the holes, tighten the fasteners from underneath the Top Panel (G) using a Phillips Screwdriver as shown.
- Page 17 Assembly (continued) Securing the back panels Place the Back Panel Brackets (MM) between the back panels and the grooves of the assembly as shown. Fasten each Back Panel Bracket (MM) using Screws (LL). Repeat until all brackets are securely in place as indicated by the diagram. Assembling the rolling doors Locate the Left and Right Rolling Doors (Q and R).
- Page 18 Assembly (continued) Attaching the door handles Each Door Handle (PP) has pre-attached screws. Remove these screws and place the Door Handles (PP) over the pre- drilled holes in each Rolling Door (Q and R). Place the pre-attached screws on the other side of each Rolling Door (Q and R) and tighten with a Phillips screwdriver through the door and into the Door Handle (PP).
- Page 19 Assembly (continued) Attaching the track guide From the back of the unit, insert Screws (RR) through the Sliders (QQ) and into the pre-drilled holes in each Rolling Door (Q and R). Attaching door stoppers Insert the Bolts (TT) through the roller track to secure the Door Stoppers (SS).
- Page 20 Assembly (continued) Attaching the cabinet doors Locate the Left and Right Cabinet Doors (S and T). Attach the Right and Left Pin Hinges (UU and V V ) to the main assembly. Slide the Left Cabinet Door (S) into the grooves and insert Screws (WW) to secure into place.
- Page 21 Assembly (continued) Installing the fireplace insert Lift the Fireplace Insert (O) carefully into the back of the unit and center in the fireplace insert opening. Do not drag the Fireplace Insert (O) across the base as it may scratch your unit. Securing the fireplace insert Align the Metal Brackets (ZZ) behind the fireplace Insert (O) and above the pre-drilled holes.
- Page 22 Assembly (continued) Installing the tipping restraint hardware When the Tipping Restraint Hardware (KK) is properly installed, it can provide protection against unexpected tipping of the Unit due to small tremors, bumps or Wall climbing. Each Tipping Restraint Hardware (KK) includes one Unit Anchor, one Wall Anchor, one Anchor Tether, and four Anchor Screws.
-
Page 23: Operation
Operation Operation NOTE: The control panel can be accessed at the upper-right corner of the insert. Powering the fireplace Adjusting the flame Push the Power button to supply power to all There are 6 brightness levels that can be selected: functions of the fireplace and put the insert in a standby mode. - Page 24 Operation (continued) Replacing the remote control battery Disposing of used batteries The battery may contain hazardous substances that When the remote control stops operating or its range could endanger the environment and human health. seems reduced, it is time to replace the battery with new ones.
- Page 25 Operation (continued) Patented Safer Plug® information SAFER PLUG This product is equipped with a Safer Plug®, which is an advanced safety device that helps detect electrical fires caused from faulty outlets. Overloading of outlets, adapters and surge protectors may cause overheating, damage, and increased risk of fires.
-
Page 26: Fcc/Ic Information
FCC/IC Information WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. -
Page 27: Troubleshooting
Troubleshooting PROBLEM ROOT CAUSE CORRECTIVE ACTION Fireplace has reached set temperature. Fireplace stopped heating before Set the fireplace to a higher temperature or Temperature around fireplace might be a few reached desired temperature. always “on”. degrees higher than other area in the room. Unplug the fireplace, remove the back panel of the fireplace and check that the The thermostat sensor is... - Page 28 Troubleshooting (continued) PROBLEM ROOT CAUSE CORRECTIVE ACTION Flame effect works but heater With the power on press and hold the Power function does not and the emberbed button on the control panel for 10 seconds. The heater is disabled. flashes when the Heater button is Once re-enabled the emberbed lights will pressed.
-
Page 29: Replacement Parts
Replacement Parts For replacement parts, call our customer service department at 1-800-986-3460, Monday - Friday 8 A.M. - 7 P.M. EST, and Saturday 9 A.M. - 6 P.M. EST. Part Description Qty. Remote Control Flame Circuit Board Blue LED Circuit Board Flame Generator Drive Motor Thermostat Sensor Blower / Heater Assembly... - Page 30 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
- Page 31 Questions, problems, missing parts? Before returning to the store call Home Decorators Customer Service Monday - Friday 8 A.M. - 7 P.M. EST, and Saturday 9 A.M. - 6 P.M. EST. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS RETAIN THIS MANUAL FOR FUTURE USE.
Need help?
Do you have a question about the 23MMP90586-PD01 and is the answer not in the manual?
Questions and answers