Testing The Connected Speakers - QDI K7VM400M Pro Series Manual

Appendix
4. The following window appears.
Headphone Output
2 Channels Output
4 Channels Output
6 Channels Output
5. Select the multi-channel operation you prefer from No. of Speakers.
6. Click OK

Testing the Connected Speakers

To ensure 4- or 6-channel audio operation works properly, you may need to test each
connected speaker to make sure every speaker work properly. If any speaker fails to
sound, then check whether the cable is inserted firmly to the connector or replace the
bad speakers with good ones.
Testing Each Speaker
The following window appears.
1. Click the audio icon
2. Click the Speaker Test tab.
3. The following window appears.
Front Left
Rear Left
4. Select the speaker which you want to test by clicking on it.
from the window tray at the bottom of the screen.
34
Keep
UnSelect
Status
Center
Front Right
Rear Right
Subwoofer
K7VM400M Pro