Advertisement
0DNLQJ7HOHSKRQH&DOOV
TeleSmart offers the following telephone calling options:
• Normal Dialing: Place calls normally.
• Memory Dialing: Quick dialing of a pre-programmed number.
• Last Number Redial: Automatic redialing of previously dialed number
• Repeat Dialing: Repeatedly redials busy numbers until connection is made.
Type of Call
Normal Dialing
Memory Dialing
[XX] ∗
1
Last Number
Redial
∗
9
9
Repeat Dialing
∗
6
6
Action/What Happens
1. Pick up any telephone handset in your home and listen for a dial
tone. Rapid beeps (if enabled) mean there are new messages
waiting.
2. To place a call, simply dial as usual after the beeps end.
1. Pick up any telephone in your home and listen for a dial tone.
2. Press [xx] [∗] (xx = 2-digit memory location number, 01-15).
The system announces a voice tag (if recorded) or phone number
for that location after you press [∗].
3. Press [1].
The system begins dialing after you press [1].
To program memory/speed dial numbers and optional voice tags, see
"Memory Dial Numbers" on page 22.
1. Pick up any telephone in your home and listen for a dial tone.
2. Press [9] [9] [∗].
TeleSMART automatically redials the last number called from any
phone in the house.
1. After dialing a number, hang up the telephone handset, then pick it
up again and listen for a dial tone.
2. Press [6] [6] [∗], then hang up the handset again.
TeleSMART will automatically redial the number once per minute
for up to 30 minutes. The system then stops dialing that number.
When the number is available, your TeleSMART keypad will beep;
pick up the telephone handset and continue with your call.
-7-
6\VWHP2YHUYLHZ
Advertisement
