Advertisement
7HOH60$57*ORVVDU\
(continued)
Message
Message Beeps
New Messages
Outgoing Message
(OGM)
Out-of-Area Number
Previous
Privacy Mode
Privacy Override
Private Number
Quick Access Key
Repeat
Repeat Dialing
Ring Answer Count
Save
Saved Message
System Time
Toll Saver
User
User Code
Voice Tag
Zone Voice Tag
A recording left by a caller in one of the assigned mailboxes. During message
playback, oldest messages are announced first. See also "New Messages" and
"Saved Messages."
A feature that causes the system to beep over the dial tone when you pick up a
phone if there are messages waiting.
A message(s) that have not yet been listened to; causes the yellow "message" LED
at the TeleSMART keypad to flash.
A pre-recorded greeting that is announced to callers when TeleSMART answers a
call. See page 13.
Phone numbers originating from a different area code.
A function that lets you display the previous message or memory location.
A feature that turns off the telephone ringers and lets the system answer all calls. If
Privacy mode is "on," all telephone ringers are turned off for 8 hours, or until Privacy
mode is turned off. See page 12.
A feature that lets you set specific numbers to automatically override the Privacy
feature if it is on. Phones ring when calls are received from the programmed phone
numbers.
An unlisted phone number. These numbers do not display Caller ID information.
A programmed key that lets you access the system by pressing the key rather than
having to enter your user code first. See page 19.
A function that replays a message.
A feature that automatically redials a busy phone number. Once started,
TeleSMART continues to redial the number once per minute for 30 minutes. When
the dialed number is available, your security system keypad rings, alerting you to
pick up the phone and continue with your call.
A programmed setting that determines the number of rings that occur before the
system answers incoming calls. See page 18.
A function that stores a message in the system.
A message that has been listened to and that has been saved by a user.
A programmed setting that lets the system time-stamp messages. See page 14.
A feature that lets you call in to the system and determine by the number of rings if
you have new messages/memos. This gives you the option of hanging up before
incurring toll charges. See page 16.
Any person in your home with access to the TeleSMART system.
A 4-digit code that gives users access to the system's basic functions. See also
"Master Code." See page 24.
A recorded name for each Memory Dial or Caller ID number. This name is
announced when calls are received from the caller.
A recorded name for up to 22 security system zones. These names are announced
when events (faults, etc.) occur on the respective zones. See page 26.
-32-
Advertisement
