Advertisement
+RZWR3URJUDP8VHU&RGHV .RQWLQXHG
1%-0&3< %'')77
=)7 23 129
)28)6 1%-0&3<)7
#
)2(
/)=4%( 1)77%+)#
=)7 23 129
/)=4%( 1)77%+)#
32 3**
97)6
7)0)'8
See the Users and Mailbox Access section of the appendix for a list of functions that are
available for the user and master.
When finished, press [8] to return to the Main Menu, or press [9] to exit the system.
8VHU&RGHV .RQW
4. Press [1], then enter the mailboxes (1-4) that this user
can access.
The order in which you enter the mailboxes is the order
in which the system plays back messages for this user.
The system automatically advances to the next prompt.
5. Press [1] to display the On/Off prompt.
To turn keypad messages on, press [1].
To turn keypad messages off, press [2].
When ON, the system automatically checks for new
messages in a user's mailbox when that user disarms
the security system. If there are new messages, the
system automatically enters the Message Menu for that
user.
The system displays the user's settings (see previous
page), then automatically advances to the next prompt.
6. Select from the options described below.
(Pressing [∗] or [#] displays the choices on the bottom line.)
User Menu
1 – Select User Lets you enter a user number (1-6) to be programmed.
2 – Review
Displays the selected user's settings.
3 – Erase
Deletes the user's settings and user number from the
system.
4 – Next
Displays the next user number.
5 – Previous
Displays the previous user number.
6 – Program
Starts the User Program Menu.
8 – Menu
Returns to the Main Menu.
9 – Exit
Exits the system.
-25-
Advertisement
