Advertisement
8VHU&RGHV RSWLRQ
17
18
Access Key
Ring Answer
NAVIGATION: [∗] = Next Option; [#] = Previous Option; [7] = GOTO prompt; [9] = Exit System.
$ERXW8VHU&RGHV
User codes are required to access the system. The system supports a Master code and
up to 5 additional User codes. The Master code can perform certain system functions that
the other user codes cannot perform.
User code programming lets you:
• assign a user code
• assign mailbox access
• turn on/off keypad messages (system automatically enters Message Menu when this
user disarms the security system).
TeleSmart vs. Security System codes
TeleSMART user numbers and user codes are independent from security system codes,
but, if desired, TeleSmart can let you control your security system from a telephone by
assigning codes as follows:
If TeleSmart user code is...
unique to TeleSmart system
same as a security system code
+RZWR3URJUDP8VHU&RGHV
463+6%1 13()
97)6 '3()
)28)6 97)6
#
)2(
976
4& 32
9' <<<<
1& <<<<
97)6 '3()#
=)7 23 129
)28)6 97)6 '3()
19
20
Caller ID Prog
Memory Dial
That user can access...
TeleSmart system only
TeleSmart system and security system
1. Go to the "21-User Code" prompt and press [0].
2. Enter the user number (location) for the code being
assigned, where:
user 1-5 = users; user 6 = master.
The system displays the settings for this user, where:
USR = user; PB = playback (keypad message);
UC = user code; MB = mailbox
The system automatically advances to the next prompt.
3. Press [1], then enter the 4-digit user code for this user.
NOTE: If the code assigned is also a valid security system
code, this user can also perform security system functions.
The system automatically advances to the next prompt.
-24-
21
22
Zone Voice Tag
User Code
23
PBX Line
Advertisement
