ADEMCO Galant 6128 RFH User Instructions
  1. Manuals
  2. Brands
  3. ADEMCO Manuals
  4. Keypad
  5. Galant 6128 RFH
  6. User instructions
ADEMCO Galant 6128 RFH User Instructions

ADEMCO Galant 6128 RFH User Instructions

Hide thumbs Also See for Galant 6128 RFH:
Table of Contents

Advertisement

Quick Links

Glossary .................................................................................................. 3
Setting the System ................................................................................. 4
Unsetting the System............................................................................. 5
Resetting the System ............................................................................. 5
Testing the System................................................................................. 6
Omitting Zones ....................................................................................... 6
Changing Codes ..................................................................................... 7
Key Fobs ................................................................................................. 8
Setting the Date and Time ..................................................................... 9
Chime Facility ......................................................................................... 9
Viewing the Log ...................................................................................... 9
System Indications............................................................................... 10
Keypad Tones ....................................................................................... 10
Hot Keys ................................................................................................ 11
Additional Information ......................................................................... 11
Zone Information .................................................................................. 12
User instructions
6128 RFH Keypad
Contents

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Galant 6128 RFH and is the answer not in the manual?

Questions and answers

Related Manuals for ADEMCO Galant 6128 RFH

Summary of Contents for ADEMCO Galant 6128 RFH

  • Page 1: Table Of Contents

    User instructions 6128 RFH Keypad Contents Glossary ....................3 Setting the System ................. 4 Unsetting the System................5 Resetting the System ................5 Testing the System................. 6 Omitting Zones ..................6 Changing Codes ..................7 Key Fobs ....................8 Setting the Date and Time ..............9 Chime Facility ..................

  • Page 3: Glossary

    Glossary The following terms will be used in this manual: Alarm A panel detection circuit has been tripped. Cancel The action of stopping an alarm condition. Keyfob A remote control device for setting and unsetting Keypad The user interface device that displays system conditions and allows user control.

  • Page 4: Setting The System

    Setting the System FULL SET To Full Set the system: Type your User Code. Press 1(FULL) A constant exit tone will sound. During the exit period, the “AWAY” symbol will be displayed and the exit tone will become broken as the user passes detectors on the exit route.

  • Page 5: Unsetting The System

    NIGHT SET Night Set permits the user to set the system in selected areas, whilst others are unset, e.g. unset in bedrooms whilst set in remaining rooms of house. This permits freedom of movement in the secure environment. To NIGHT SET the system: Enter the User Code.

  • Page 6: Testing The System

    Testing the System To TEST the system: Enter the User Code. Press 5/TEST. The outside bell/sounder will ring for 5 seconds and the strobe will flash until the test is finished. All keypad segments will display for 5 seconds. Note: Test each zone individually when the keypad stops scrolling and the bell/sounder stops ringing.

  • Page 7: Changing Codes

    Changing Codes The system can support up to 8 separate user codes. MASTER CODE: User 1. The Master Code (User 1) can be changed: Enter Master Code (e.g. 1234). Press 8/CODE. Press 1 (User 1). Enter new User Code (e.g. 5678). Two beeps confirms code acceptance.

  • Page 8: Key Fobs

    Key Fobs The system can support up to 8 separate user fobs for setting and unsetting only. TO ADD A NEW FOB: Enter Master Code (e.g. 1234). Press 8/CODE. Press a user number (pick a user number from 1 to 8). Wait for a double beep.

  • Page 9: Setting The Date And Time

    Setting the Date and Time The system contains a clock, which is used to record the DATE AND TIME of each event as it occurs. To set the clock: Enter User Code. Press # + 0. Enter ddmmyyhhmm (day, month, year, hour, minute). I.E. 2 digits for each section.

  • Page 10: System Indications

    System Indications KEYPAD DISPLAY MEANING ‘AC’ and ‘READY’ System normal SET/UNSET ‘FULL’ System is going into FULL SET ‘PART’ System is going into PART SET ‘NIGHT’ System is going into NIGHT SET ‘01’ to ‘08’ and ‘CHECK’ TAMPER alarm on Zone shown ‘01’...

  • Page 11: Hot Keys

    Hot Keys HOT KEY TYPE KEYPAD N LCD DISPLAY Assistance Alarm Fire # + 3 Fire Panic Hot keys are convenient and specific for alarms specified above. e.g. To trigger a panic alarm: Press # + Alarm will sound and ‘99 ’...

  • Page 12: Zone Information

    Zone Information ZONE LOCATION FULL PART NIGHT IU2-1233-01 Rev 1...

Table of Contents