Appendix; Decommissioning And Packaging; Other Applicable Documents; Approvals And Certifications - ABB Sensyflow FMT200-D Operating Instruction

Thermal mass flowmeter for biogas and compressed air applications

Hide thumbs Also See for Sensyflow FMT200-D:

Table of Contents

Appendix

10 Appendix

Packaging the device ready for transport or return to the manufacturer

If the original packaging material is no longer available, wrap the device in bubble wrap or

corrugated cardboard and place it in a box of sufficient size lined with a shock-absorbing

material (e.g., foam rubber). The thickness of the padding should be appropriate for the device

weight and type of shipment. The box must be handled with care and labeled accordingly.

For overseas shipment, always add a desiccant (e.g., silica gel) and hermetically seal the

device plus desiccant in a layer of polythene that is 0.2 mm thick. Use an amount of desiccant

that is appropriate for the packing volume and the expected transport time (at least sufficient for

3 months). You should also line the box with a layer of union paper.

All devices returned to the manufacturer must be accompanied by a completed and signed

decontamination certificate (see Appendix). Without this, ABB will not be able to process the

return.

•

Data sheet 10/14-6.73

CE mark

The version of the device as provided by us meets the requirements of the

following European directives:

EMC Directive 2004/108/EC

ATEX Directive 94/9/EC

Sensyflow FMT200-D

42/14-37-EN

Table of Contents