Memory Configuration - QDI CenturieX 1 Manual

Hide thumbs Also See for CenturieX 1:
Table of Contents

Advertisement

Installation Instructions
Features of this CD-ROM:
- DemoShield Software
Utilizing DemoShield software to develop it, which provide you a very new, easier-to-use
and more intuitive user interface.
- Point-and-Click
when using this CD-ROM, just point to the option you required and click it, then the driver
or the software that you need will be automatically installed.
- Intelligently Recognition
Automatically recognizing the hardware, then installing the necessary drivers for your
onboard components to work properly.
Please refer to page 49 to get more detailed information of the contents contained in this
CD-ROM.
®
Note:
Because Intel
810 chipset driver is compatible with Intel
you can also choose the option "Intel 810 INF"on CD-2000 to install.

Memory configuration

This maiboard provides two Rambus In-line Memory Module (RIMM) sockets to support a
flexible memory size ranging from 64MB up to 1GB. Both 300MHz and 400MHz Direct Rambus
are supported. The following set of rules allows optimum confiurations
Possible Direct Rambus memory size are 64MB, 128MB, , 256MB, 512MB in each RIMM
l
socket.
300MHz Driect Rambus only run at 100MHz system host bus, 400MHz Direct Rambus can
l
run at 100/133MHz system host bus.
Supports up to 32 Direct Rambus devices per channel
l
The following table determines the some ways of arranging RIMM memory.
RIMM 1
RIMM
*C-RIMM
RIMM
*Note: C-RIMM is RIMM continuity card.
30
RIMM 2
*C-RIMM
RIMM
RIMM
Manual for CenturieX 1
®
820 chipset,

Advertisement

Table of Contents
loading

Table of Contents