Set Face Picture Parameters - HIKVISION DS-K1TA70MI-T User Manual

Parameter
Community No.
Building No.
Unit No.
Voice Prompt
Voice Volume
Application Mode
White Light Brightness Set the supplement white light's brightness. The brightness ranges from

6.8.2 Set Face Picture Parameters

You can set the face 1:N (security) level, 1:1 (security) level, recognition interval, liveness security
level, WDR level, pupillary distance, face with mask detection and ECO mode.
On the Home page, tap System (System Settings) to enter the System Settings page.
Face Recognition Terminal User Manual
Table 6-2 Basic Parameters
Set the device installed community No.
Set the device installed building No.
Set the device installed Unit No.
Tap or to disable or enable the voice prompt.
Adjust the voice volume. The larger the value, the louder the volume.
You can select either others or indoor according to actual environment.
0 to 100.
0 refers to turning off the light. 1 refers to the darkest, and 100 refers to
the brightest
Description
42