HIKVISION DS-K1T502 Series User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. IP Access Controllers
  5. DS-K1T502 Series
  6. User manual

HIKVISION DS-K1T502 Series User Manual

Access control terminal
Hide thumbs Also See for DS-K1T502 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
DS-K1T502 Series Access Control Terminal
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-K1T502 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HIKVISION DS-K1T502 Series

Summary of Contents for HIKVISION DS-K1T502 Series

  • Page 1 DS-K1T502 Series Access Control Terminal User Manual...

  • Page 2: About This Document

    ● Products described in this Document, which may include licenses obtained from third ‰‰rti‰‰‰ Any part of the Document, including text, pictures, graphics, etc., belongs to Hikvision. No part ● of this Document may be excerpted, copied, translated, or m‰‰‰‰〶‰‰ in whole or in part by any means without wr‰‰〷‰n permission.
  • Page 3 LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY ●...
  • Page 4 DS-K1T502 Series Access Control Terminal User Manual Symbol C‰nv‰nti‰n‰ The symbols that may be found in this document are ‰‰‰〶n‰‰ as follows. Symbol ‰‰‰cr‰‰ti‰n Indicates a hazardous ‰‰‰‰‰ti‰n which, if not avoided, will or could Danger result in death or serious injury.
  • Page 5 DS-K1T502 Series Access Control Terminal User Manual Regulatory ‰n‰‰rm‰ti‰n FCC ‰n‰‰rm‰ti‰n Please take ‰‰〷‰nti‰n that changes or m‰‰‰‰〶c‰ti‰n not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

  • Page 6: Eu Conformity Statement

    DS-K1T502 Series Access Control Terminal User Manual EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC ‰‰r‰ctiv‰ 2014/30/EU, the RoHS ‰‰r‰ctiv‰ 2011/65/EU 2012/19/EU (WEEE ‰‰r‰ctiv‰)‰...
  • Page 7 DS-K1T502 Series Access Control Terminal User Manual rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une c‰mm‰n‰c‰ti‰n ‰‰ti‰‰‰‰‰‰n‰‰‰ This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. Cet équipement doit être installé et ‰ti‰‰‰‰ à une distance minimale de 20 cm entre le radiateur et...
  • Page 8 DS-K1T502 Series Access Control Terminal User Manual Safety ‰n‰‰r‰cti‰n These ‰n‰‰r‰cti‰n‰ are intended to ensure that user can use the product correctly to avoid danger or property loss. The ‰r‰c‰‰ti‰n measure is divided into Dangers and C‰‰ti‰n‰‰ Dangers: N‰‰‰‰ctin‰ any of the warnings may cause serious injury or death.
  • Page 9 DS-K1T502 Series Access Control Terminal User Manual Do not place the device in extremely hot (refer to the ‰‰‰c‰‰〶c‰ti‰n of the device for the detailed ● ‰‰‰r‰tin‰ temperature), cold, dusty or damp ‰‰c‰ti‰n‰‰ and do not expose it to high ‰‰‰c‰r‰m‰‰n‰tic r‰‰‰‰ti‰n‰...

  • Page 10: Available Models

    DS-K1T502 Series Access Control Terminal User Manual Available Models The access control terminal contains the following models: Product Name Model Wireless Access Control Terminal DS-K1T502DBWX-C 13.56 MHz Card ‰r‰‰‰ntin‰ Frequency, Wi-Fi, 2.4G,Bluetooth DS-K1T502DBFWX-C 13.56 MHz Card ‰r‰‰‰ntin‰ Frequency, Wi-Fi, 2.4G,Bluetooth DS-K1T502DBFWX 13.56 MHz Card ‰r‰‰‰ntin‰...

  • Page 11: Table Of Contents

    DS-K1T502 Series Access Control Terminal User Manual Contents Chapter 1 Overview ........................1 1.1 Overview ..........................1 1.2 Features ..........................1 1.3 Appearance ‰‰‰cr‰‰ti‰n ......................1 Chapter 2 ‰n‰‰‰‰‰‰ti‰n ......................... 4 2.1 ‰n‰‰‰‰‰‰ti‰n Environment ......................4 2.2 Install without Gang Box ......................4 Chapter 3 Device Wiring ......................
  • Page 12 DS-K1T502 Series Access Control Terminal User Manual 7.4.2 View Online Help Document ..................20 7.5 Logout ..........................20 7.6 Quick ‰‰‰r‰ti‰n via Web Browser ..................20 7.6.1 Set Security Q‰‰‰ti‰n ....................20 7.6.2 Select Language ......................20 7.6.3 Time ‰‰〷呠n‰‰ ....................... 21 7.6.4 Privacy ‰‰〷呠n‰‰...
  • Page 13 DS-K1T502 Series Access Control Terminal User Manual 7.10.2 View Device ‰n‰‰rm‰ti‰n via PC Web ................ 45 7.10.3 Set Time ........................45 7.10.4 Set DST ........................46 7.10.5 Change Administrator's Password ................47 7.10.6 Account Security ‰‰〷呠n‰‰ via PC Web ............... 47 7.10.7 Online Users ......................
  • Page 14 DS-K1T502 Series Access Control Terminal User Manual 8.5 C‰n‰〶‰‰r‰ti‰n ........................68 8.5.1 View Device ‰n‰‰rm‰ti‰n ..................... 68 8.5.2 Time ‰‰〷呠n‰‰ ....................... 68 8.5.3 Set DST ........................69 8.5.4 User Management ...................... 69 8.5.5 Network ........................70 8.5.6 User Management ...................... 72 8.5.7 Event Search ........................

  • Page 15: Chapter 1 Overview

    DS-K1T502 Series Access Control Terminal User Manual Chapter 1 Overview 1.1 Overview Access control terminal is a kind of access control terminal for ‰‰‰‰‰ntic‰ti‰n‰ It supports two-way audio, remote live view, picture capture, video recording through NVR, and so on.
  • Page 16 DS-K1T502 Series Access Control Terminal User Manual Note The pictures here are for reference only. Table 1-1 Appearance ‰‰‰cr‰‰ti‰n ‰‰‰cr‰‰ti‰n Loudspeaker Camera (Supported by parts of Device Models) Fingerprint Module (Supported by parts of Device Models) Card ‰r‰‰‰ntin‰ Area Tamper...
  • Page 17 DS-K1T502 Series Access Control Terminal User Manual ‰‰‰cr‰‰ti‰n Wiring Terminal Debugging Port (For debugging only)

  • Page 18: Chapter 2 ‰N‰‰‰‰‰‰Ti‰N

    DS-K1T502 Series Access Control Terminal User Manual Chapter 2 ‰n‰‰‰‰‰‰ti‰n 2.1 ‰n‰‰‰‰‰‰ti‰n Environment Install the device at least 2 meters away from the light, and at least 3 meters away from the ● window or the door. Make sure the environment ‰‰‰‰m‰n‰ti‰n is more than 100 Lux.
  • Page 19 DS-K1T502 Series Access Control Terminal User Manual Figure 2-1 Secure M‰‰ntin‰ Plate 2. Route the cable through the cable hole of the m‰‰ntin‰ plate, and connect to corresponding external devices' cables. 3. Apply Silicone sealant among the joints between the device rear panel and the wall (except the...
  • Page 20 DS-K1T502 Series Access Control Terminal User Manual Figure 2-2 Apply Silicone Sealant on the Side 4. Align the device with the m‰‰ntin‰ plate, and secure the device on the m‰‰ntin‰ plate with 1 supplied screw (SC-KM3X6-T10-SUS).
  • Page 21 DS-K1T502 Series Access Control Terminal User Manual Figure 2-3 Secure Device...

  • Page 22: Chapter 3 Device Wiring

    DS-K1T502 Series Access Control Terminal User Manual Chapter 3 Device Wiring 3.1 Terminal ‰‰‰cr‰‰ti‰n The terminals contains power input, alarm input, alarm output, RS-485, Wiegand output, and door lock. The terminal's diagram is as follows: Figure 3-1 Terminal Diagram The ‰‰‰cr‰‰ti‰n‰ of the terminals are as follows: Table 3-1 Terminal ‰‰‰cr‰‰ti‰n‰...

  • Page 23: External Device Wiring

    DS-K1T502 Series Access Control Terminal User Manual Group ‰‰ncti‰n Color Name ‰‰‰cr‰‰ti‰n Group D Door Lock White/Purple Lock Wiring (NC) White/Yellow Common White/Red Lock Wiring (NO) Yellow/Green SENSOR Door Contact Black Ground Yellow/Gray Exit Door Wiring 3.2 External Device Wiring Wire the external device.

  • Page 24: Wire Secure Door Control Unit

    DS-K1T502 Series Access Control Terminal User Manual Figure 3-2 External Device Wiring 3.3 Wire Secure Door Control Unit You can connect the terminal with the secure door control unit. The wiring diagram is as follows.
  • Page 25 DS-K1T502 Series Access Control Terminal User Manual Figure 3-3 Secure Door Control Unit Wiring Note The secure door control unit should connect to an external power supply separately. The ● suggested external power supply is 12V, 0.5A. For scenarios with high safety requirement, use the secure door control unit wiring ‰〶r‰‰‰...

  • Page 26: Chapter 4 ‰Ctiv‰Ti‰N

    DS-K1T502 Series Access Control Terminal User Manual Chapter 4 ‰ctiv‰ti‰n You should ‰ctiv‰‰‰ the device before the ‰〶r‰‰ login. ‰ft‰r powering on the device, the system will switch to Device ‰ctiv‰ti‰n page. ‰ctiv‰ti‰n via the device, SADP tool and the client ‰‰ftw‰r‰ are supported.

  • Page 27: Ctiv‰‰‰ Via Web Browser

    DS-K1T502 Series Access Control Terminal User Manual 3. Click ‰ctiv‰‰‰. 4. Edit the device IP address. You can edit the IP address via the SADP tool, PC web browser and the client ‰‰ftw‰r‰‰ 4.2 ‰ctiv‰‰‰ via Web Browser You can ‰ctiv‰‰‰ the device via the web browser.

  • Page 28: Ctiv‰‰‰ Device Via Ivms-4200 Client ‰‰Ftw‰R

    DS-K1T502 Series Access Control Terminal User Manual 2. Find and select your device in online device list. 3. Input new password (admin password) and c‰n‰〶rm the password. C‰‰ti‰n STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case ‰‰‰〷‰r‰‰ lower case ‰‰‰〷‰r‰‰...
  • Page 29 DS-K1T502 Series Access Control Terminal User Manual Steps Note This ‰‰ncti‰n should be supported by the device. 1. Enter the Device Management page. on the right of Device Management and select Device. 2. Click 3. Click Online Device to show the online device area.

  • Page 30: Chapter 5 ‰‰‰Nti‰‰ ‰‰‰‰‰Ntic‰Ti‰N

    DS-K1T502 Series Access Control Terminal User Manual Chapter 5 ‰‰‰nti‰‰ ‰‰‰‰‰ntic‰ti‰n ‰ft‰r network c‰n‰〶‰‰r‰ti‰n‰ system parameters c‰n‰〶‰‰r‰ti‰n and user c‰n‰〶‰‰r‰ti‰n‰ you can go back to the ‰n‰ti‰‰ page for ‰‰‰nti‰y ‰‰‰‰‰ntic‰ti‰n‰ The system will ‰‰‰‰‰ntic‰‰‰ person according to the c‰n‰〶‰‰r‰‰ ‰‰‰‰‰ntic‰ti‰n mode.
  • Page 31 DS-K1T502 Series Access Control Terminal User Manual Note The card can be normal IC card, or encrypted card. ● If the QR Code Scanning ‰‰ncti‰n is enabled, you can put the QR code in front of the device ● camera to ‰‰‰‰‰ntic‰‰‰ via QR code.

  • Page 32: Chapter 6 Call And Video Intercom

    DS-K1T502 Series Access Control Terminal User Manual Chapter 6 Call and Video Intercom Set the SIP server IP, calling and video intercom between devices are available. Set Device A as SIP server, and set Device A's IP as SIP server IP. For details, see . All other devices that need to call each other should be registered to the server.

  • Page 33: Chapter 7 ‰‰‰R‰Ti‰N Via Web Browser

    Answer the security q‰‰‰ti‰n‰‰ E-mail ‰‰r‰‰〶c‰ti‰n 1. Export the QR code and send it to pw_recovery@hikvision.com as ‰‰〷‰c‰m‰n‰‰ 2. You will receive a v‰r‰‰〶c‰ti‰n code within 5 minutes in your reserved email. 3. Enter the v‰r‰‰〶c‰ti‰n code into the v‰r‰‰〶c‰ti‰n code ‰〶‰‰‰ to verify your ‰‰‰nti‰〶c‰ti‰n‰...

  • Page 34: Help

    Answer the security q‰‰‰ti‰n‰‰ E-mail ‰‰r‰‰〶c‰ti‰n 1. Export the QR code and send it to pw_recovery@hikvision.com as ‰‰〷‰c‰m‰n‰‰ 2. You will receive a v‰r‰‰〶c‰ti‰n code within 5 minutes in your reserved email. 3. Enter the v‰r‰‰〶c‰ti‰n code into the v‰r‰‰〶c‰ti‰n code ‰〶‰‰‰ to verify your ‰‰‰nti‰〶c‰ti‰n‰...

  • Page 35: Time ‰‰〷呠N

    DS-K1T502 Series Access Control Terminal User Manual Click in the top right of the web page to enter the Device Language ‰‰〷呠n‰‰ page. You can select a language for the device system from the drop-down list. By default, the system language is English.

  • Page 36: And System Network

    DS-K1T502 Series Access Control Terminal User Manual 7.6.5 No. and System Network Steps 1. Click in the top right of the web page to enter the wizard page. ‰ft‰r previous ‰‰〷呠n‰‰‰ you can click Next to enter the No. and Network System Network ‰‰〷呠n‰‰ page.

  • Page 37: Person Management

    DS-K1T502 Series Access Control Terminal User Manual Main ‰‰‰ti‰n IP Enter the main ‰‰‰ti‰n′‰ IP address that used for c‰mm‰n‰c‰ti‰n‰ Private Server IP Refers to the SIP server IP. Enter the main ‰‰‰ti‰n′‰ IP address that used for c‰mm‰n‰c‰ti‰n‰ At this tim‰ the main ‰‰‰ti‰n is used as a SIP server. Other intercom devices should registered to this server address to realize c‰mm‰n‰c‰ti‰n‰...

  • Page 38: Access Control Management

    DS-K1T502 Series Access Control Terminal User Manual Click Add Fingerprint, and press your ‰〶n‰‰r on the ‰〶n‰‰r‰r‰n‰ module of the device to add your ‰〶n‰‰r‰r‰n‰‰ Click Save to save the ‰‰〷呠n‰‰‰ Add PIN Before c‰n‰〶‰‰r‰n‰ passwords, it is necessary to clarify whether the password is a device-set personal PIN or a ‰‰‰tf‰rm‰‰‰‰‰‰‰‰...
  • Page 39 DS-K1T502 Series Access Control Terminal User Manual Figure 7-1 Overview Page ‰‰ncti‰n ‰‰‰cr‰‰ti‰n‰‰ Door Status Click to view the device live view. Set the volume when ‰‰‰rtin‰ live view. Note If you adjust the volume when ‰‰‰rtin‰ two-way audio, you may hear a repeated sounds.

  • Page 40: Search Event

    DS-K1T502 Series Access Control Terminal User Manual You can view the event Employee ID, Name, Card No., Event Type, Time, and ‰‰‰r‰ti‰n‰ You can also click View More to enter the search c‰n‰‰ti‰n‰‰ including the event type, employee ID, the name, the card No., the start tim‰‰...

  • Page 41: Door Parameter C‰N‰〶‰‰R‰Ti‰N

    DS-K1T502 Series Access Control Terminal User Manual 7.8.3 Door Parameter C‰n‰〶‰‰r‰ti‰n C‰n‰〶‰‰r‰ parameters for unlocking doors. Set Door Name Create door name. Click Access Control → Parameter ‰‰〷呠n‰‰ → Door Parameters to enter the ‰‰〷呠n‰‰ page. Set Door Name and click Save.
  • Page 42 DS-K1T502 Series Access Control Terminal User Manual Set Exit B‰‰〷‰n via PC Web Set the exit b‰‰〷‰n as remain open or remain closed according to the actual wiring method. Click Access Control → Parameter ‰‰〷呠n‰‰ → Door Parameters to enter the ‰‰〷呠n‰‰ page.
  • Page 43 DS-K1T502 Series Access Control Terminal User Manual Click Save. Note Duress code and super password can’t be duplicated, usually c‰n‰‰‰tin‰ of 4 to 8 digits. Set Dismiss Code via PC Web The administrator or ‰‰‰c‰‰〶‰‰ person can enter the dismiss code to dismiss the alarm.

  • Page 44: Ntic‰Ti‰N ‰‰〷呠N

    DS-K1T502 Series Access Control Terminal User Manual 7.8.4 ‰‰‰‰‰ntic‰ti‰n ‰‰〷呠n‰‰ Figure 7-3 ‰‰‰‰‰ntic‰ti‰n ‰‰〷呠n‰‰ Select Main or Sub Card Reader via PC Web Set the terminal for person ‰‰‰‰‰ntic‰ti‰n‰...
  • Page 45 DS-K1T502 Series Access Control Terminal User Manual Click Access Control → Parameter ‰‰〷呠n‰‰ → ‰‰‰‰‰ntic‰ti‰n ‰‰〷呠n‰‰ to enter the ‰‰〷呠n‰‰ page. Select the terminal as main or sub card reader. Set other parameters and click Save. View Terminal Type and Model via PC Web You can view terminal type and model.
  • Page 46 DS-K1T502 Series Access Control Terminal User Manual Set ‰‰‰‰‰ntic‰ti‰n Interval via PC Web You can set the ‰‰‰‰‰ntic‰ti‰n interval of the same person when ‰‰‰‰‰ntic‰tin‰‰ The same person can only ‰‰‰‰‰ntic‰‰‰ once in the c‰n‰〶‰‰r‰‰ interval. A second ‰‰‰‰‰ntic‰ti‰n will be failed. If other person ‰‰‰‰‰ntic‰‰‰...
  • Page 47 DS-K1T502 Series Access Control Terminal User Manual If the device support QR code r‰c‰‰n‰ti‰n‰ you can enable QR Code and the device can read the QR code converted from the card No. Click Save. Set C‰mm‰n‰c‰ti‰n with Controller Every via PC Web You can set c‰mm‰n‰c‰ti‰n with controller every of sub card reader.

  • Page 48: Card ‰‰〷呠N

    DS-K1T502 Series Access Control Terminal User Manual Note You should add the device to mobile App before ‰‰‰r‰ti‰n‰ 7.8.5 Card ‰‰〷呠n‰‰ Figure 7-4 Card ‰‰〷呠n‰‰ Enable/Disable NFC ‰r‰‰‰cti‰n via PC Web ‰ft‰r enabling, the device can read NFC card. Click Access Control → Parameter ‰‰〷呠n‰‰ → Card ‰‰〷呠n‰‰ to enter the ‰‰〷呠n‰‰ page.
  • Page 49 DS-K1T502 Series Access Control Terminal User Manual Enable/Disable M1 Card via Web Client ‰ft‰r enabling, the device can recognize M1 card and users can swipe M1 card via the device. Click Access Control → Parameter ‰‰〷呠n‰‰ → Card ‰‰〷呠n‰‰ to enter the ‰‰〷呠n‰‰ page.

  • Page 50: Linkage ‰‰〷呠N

    DS-K1T502 Series Access Control Terminal User Manual ‰ft‰r enabling, the device can read FeliCa card. Click Access Control → Parameter ‰‰〷呠n‰‰ → Card ‰‰〷呠n‰‰ to enter the ‰‰〷呠n‰‰ page. Enable Enable FeliCa Card. Click Save. ‰ft‰r enabling, the device can read FeliCa card.

  • Page 51: Set Working Mode Via Pc Web

    DS-K1T502 Series Access Control Terminal User Manual Figure 7-5 Linkage ‰‰〷呠n‰‰ 2. Click + . 3. Set event source. Select the linkage type as Event Linkage, Card Linkage or Link Employee ID. - Select Linkage Type as Event Linkage, you can select event types according to your actual needs.

  • Page 52: Set Remote ‰‰R‰‰〶C‰Ti‰N

    DS-K1T502 Series Access Control Terminal User Manual Click Access Control → Parameter ‰‰〷呠n‰‰ → Terminal Parameters to enter the ‰‰〷呠n‰‰ page. Working Mode You can set the working mode as access control mode or permission free mode. Access Control Mode The access control mode is the device normal mode.

  • Page 53: Privacy ‰‰〷呠N

    DS-K1T502 Series Access Control Terminal User Manual 7.8.9 Privacy ‰‰〷呠n‰‰ Figure 7-6 Privacy ‰‰〷呠n‰‰ Set Event Storage Type via PC Web Browser You can c‰n‰〶‰‰r‰ the event storage type. Click Access Control → Parameter ‰‰〷呠n‰‰ → Privacy ‰‰〷呠n‰‰ to enter the ‰‰〷呠n‰‰ page.
  • Page 54 DS-K1T502 Series Access Control Terminal User Manual The earliest 5% events will be deleted when the system detects the stored events has been over 95% of the full space. Click Save. Set Picture Uploading and Storage Parameters Set picture uploading and storage parameters.

  • Page 55: Video Intercom ‰‰〷呠N

    DS-K1T502 Series Access Control Terminal User Manual 7.9 Video Intercom ‰‰〷呠n‰‰ 7.9.1 Device Management You can view the device No., type, IP, serial No., model, version, ‰〶‰‰r No., room No., No., arming status, user name, network status and ‰‰‰r‰ti‰n‰ You can also add indoor ‰‰‰ti‰n and sub door ‰‰‰ti‰n on the device management page, and manage, upgrade or delete devices.
  • Page 56 DS-K1T502 Series Access Control Terminal User Manual The device can be used as a door ‰‰‰ti‰n or outer door ‰‰‰ti‰n‰ Select a device type from the drop-down list. Note If you change the device type, you should reboot the device.

  • Page 57: C‰N‰〶‰‰R‰ Video Intercom Network Parameters Via Web Browser

    DS-K1T502 Series Access Control Terminal User Manual 7.9.3 C‰n‰〶‰‰r‰ Video Intercom Network Parameters via Web Browser You can set the r‰‰‰‰‰r‰ti‰n password, main ‰‰‰ti‰n IP and private server IP, and you can enable protocol 1.0 according to your actual needs.

  • Page 58: Set Press B‰‰〷‰N To Call Via Pc Web

    DS-K1T502 Series Access Control Terminal User Manual Figure 7-9 Call ‰‰〷呠n‰‰ Max. C‰mm‰n‰c‰ti‰n Time The Maximum c‰mm‰n‰c‰ti‰n tim‰ when the main ‰‰‰ti‰n and the other devices are in the call. When the c‰mm‰n‰c‰ti‰n tim‰ exceeds the c‰n‰〶‰‰r‰‰ tim‰‰ the c‰mm‰n‰c‰ti‰n will stop. The Max.

  • Page 59: System C‰N‰〶‰‰R‰Ti‰N

    DS-K1T502 Series Access Control Terminal User Manual 2. Click Add, and enter Room No. and SIP1 phone number. 3. ‰‰ti‰n‰‰‰ Click Add to add the SIP number or click to delete the number. 4. ClickSave. 5. ‰‰ti‰n‰‰‰ You can click Delete to delete room number and its SIP number.

  • Page 60: Set Dst

    DS-K1T502 Series Access Control Terminal User Manual Click System and Maintenance → System C‰n‰〶‰‰r‰ti‰n → System → System ‰‰〷呠n‰‰ → Time ‰‰〷呠n‰‰ . Figure 7-12 Time ‰‰〷呠n‰‰ Click Save to save the ‰‰〷呠n‰‰ ‰ft‰r the c‰n‰〶‰‰r‰ti‰n‰ Time Zone Select the device located tim‰ zone from the drop-down list.

  • Page 61: Change Administrator's Password

    DS-K1T502 Series Access Control Terminal User Manual 7.10.5 Change Administrator's Password Steps 1. Click System and Maintenance → System C‰n‰〶‰‰r‰ti‰n → System → User Management → User Management . 2. Click 3. Enter the old password and create a new password.

  • Page 62: Network ‰‰〷呠N

    DS-K1T502 Series Access Control Terminal User Manual Go to System and Maintenance → System C‰n‰〶‰‰r‰ti‰n → System → User Management → Arming/Disarming ‰n‰‰rm‰ti‰n . You can view the device arming/disarming ‰n‰‰rm‰ti‰n‰ Click Refresh to refresh the page. 7.10.9 Network ‰‰〷呠n‰‰...

  • Page 63: Set Wi-Fi Parameters

    DS-K1T502 Series Access Control Terminal User Manual If uncheck the ‰‰ncti‰n‰ you should set the IPv4 address, IPv4 subnet mask, IPv4 default gateway, IPv6 mode, IPv6 address, IPv6 subnet ‰r‰‰〶x length, IPv6 default gateway, Mac address, and MTU. If you check the ‰‰ncti‰n‰ the system will allocate the IPv4 address, IPv4 subnet mask, the IPv4 default gateway, IPv6 mode, IPv6 address, IPv6 subnet ‰r‰‰〶x length, and IPv6 default gateway...
  • Page 64 DS-K1T502 Series Access Control Terminal User Manual 4. ‰‰ti‰n‰‰‰ Set the WLAN parameters. 1) Set the IP address, subnet mask, and default gateway. Or enable DHCP and the system will allocate the IP address, subnet mask, and default gateway ‰‰‰‰m‰tic‰‰‰y‰...
  • Page 65 DS-K1T502 Series Access Control Terminal User Manual Set ISUP Parameters via PC Web Set the ISUP parameters for accessing device via ISUP protocol. Steps Note The ‰‰ncti‰n should be supported by the device. 1. Click System and Maintenance → System C‰n‰〶‰‰r‰ti‰n → Network → Device Access → ISUP .
  • Page 66 DS-K1T502 Series Access Control Terminal User Manual Bluetooth ‰‰〷呠n‰‰ You can enable bluetooth ‰‰ncti‰n‰ Click C‰n‰〶‰‰r‰ti‰n → Network → Network ‰‰〷呠n‰‰ → Bluetooth . Open Enable Open to enable the bluetooth ‰‰ncti‰n‰ Device Name You can edit the device name connected to the bluetooth.
  • Page 67 DS-K1T502 Series Access Control Terminal User Manual Figure 7-15 VoIP Account ‰‰〷呠n‰‰ R‰‰‰‰‰r‰ti‰n Password Enter the r‰‰‰‰‰r‰ti‰n password for c‰mm‰n‰c‰ti‰n via SIP server. The r‰‰‰‰‰r‰ti‰n password for the SIP server is c‰n‰〶‰‰r‰‰ usually in the main ‰‰‰ti‰n′‰ SIP ‰‰〷呠n‰‰‰ Server IP Address Enter the main ‰‰‰ti‰n′‰...

  • Page 68: Set Video And Audio Parameters Via Pc Web

    DS-K1T502 Series Access Control Terminal User Manual 7.10.10 Set Video and Audio Parameters via PC Web C‰n‰〶‰‰r‰ Video Parameters via Web Browser You can set quality, r‰‰‰‰‰ti‰n and other parameters of device camera. Click System and Maintenance → System C‰n‰〶‰‰r‰ti‰n → Video/Audio → Video to enter the ‰‰〷呠n‰‰...

  • Page 69: Image Parameters ‰‰〷呠N

    DS-K1T502 Series Access Control Terminal User Manual 7.10.11 Image Parameters ‰‰〷呠n‰‰ Figure 7-17 Display ‰‰〷呠n‰‰...
  • Page 70 DS-K1T502 Series Access Control Terminal User Manual Set Br‰‰‰‰n‰‰‰‰C‰n‰r‰‰‰‰‰‰‰‰r‰ti‰n‰‰‰‰r‰n‰‰‰ via PC Web You can set picture ‰n‰‰rm‰ti‰n such as brightness, contrast, ‰‰‰‰r‰ti‰n and sharpness of live view page. Click System and Maintenance → System C‰n‰〶‰‰r‰ti‰n → Image → Display ‰‰〷呠n‰‰ to enter the ‰‰〷呠n‰‰...

  • Page 71: Set Event ‰‰‰‰Cti‰N Via Pc Web

    DS-K1T502 Series Access Control Terminal User Manual 7.10.12 Set Event ‰‰‰‰cti‰n via PC Web ‰ft‰r ‰‰〷呠n‰ the m‰ti‰n ‰‰‰‰cti‰n event, if there is moving objects trigger the rule, the device will report to the ‰‰‰tf‰rm‰ Click System and Maintenance → System C‰n‰〶‰‰r‰ti‰n → Event → Event ‰‰‰‰cti‰n.

  • Page 72: Alarm ‰‰〷呠N‰‰ Via Pc Web

    DS-K1T502 Series Access Control Terminal User Manual 7.10.13 Alarm ‰‰〷呠n‰‰ via PC Web Set the alarm output parameters. Steps 1. Click System and Maintenance → System C‰n‰〶‰‰r‰ti‰n → Event → Alarm ‰‰〷呠n‰‰ → Alarm Output . 2. Set Alarm Name and mode of Alarm ‰‰r‰ti‰n.
  • Page 73 DS-K1T502 Series Access Control Terminal User Manual Select a peripheral from the drop-down list according the actual ‰‰‰‰‰ti‰n‰ You can select from Card Reader, Extension Module, Access Controller, or Disable. Note ‰ft‰r the peripheral is changed and saved, the device will reboot ‰‰‰‰m‰tic‰‰‰y‰...
  • Page 74 DS-K1T502 Series Access Control Terminal User Manual 4. Click Save to save the ‰‰〷呠n‰‰‰ Note If you change the peripheral, and ‰ft‰r you save the device parameters, the device will reboot ‰‰‰‰m‰tic‰‰‰y‰ Elevator Control via PC Web Steps 1. Click System and Maintenance → System C‰n‰〶‰‰r‰ti‰n → Access C‰n‰〶‰‰r‰ti‰n‰ → Elevator Control Parameters .

  • Page 75: System And Maintenance

    DS-K1T502 Series Access Control Terminal User Manual 7.11 System and Maintenance 7.11.1 Reboot You can reboot the device. Click System and Maintenance → Maintenance → Restart to enter the ‰‰〷呠n‰‰ page. Click Restart to reboot the device. 7.11.2 Upgrade Upgrade Locally via PC Web You can upgrade the device locally.

  • Page 76: Export Device Parameters Via Pc Web

    DS-K1T502 Series Access Control Terminal User Manual Restore to Default ‰‰〷呠n‰‰ via PC Web You can restore device to default ‰‰〷呠n‰‰‰ Click System and Maintenance → Maintenance → Backup and Reset to enter the ‰‰〷呠n‰‰ page. Click Restore, the device will restore to the default ‰‰〷呠n‰‰‰ except for the device IP address and the user ‰n‰‰rm‰ti‰n‰...

  • Page 77: View Log Via Pc Web

    DS-K1T502 Series Access Control Terminal User Manual Test Protocol via PC Web Select a protocol address, and enter the protocol to test. You can debug the device according to the response header and returned value. Go to System and Maintenance → Maintenance → Device Debugging → Protocol ‰‰‰tin‰.

  • Page 78: C‰Rti‰〶C‰‰‰ Management

    DS-K1T502 Series Access Control Terminal User Manual Select a security mode, and click Save. Security Mode High security level for user ‰n‰‰rm‰ti‰n v‰r‰‰〶c‰ti‰n when logging in the client ‰‰ftw‰r‰‰ C‰m‰‰tib‰‰ Mode The user ‰n‰‰rm‰ti‰n v‰r‰‰〶c‰ti‰n is c‰m‰‰tib‰‰ with the old client ‰‰ftw‰r‰ version when logging in.
  • Page 79 DS-K1T502 Series Access Control Terminal User Manual 3. Click Import. Import CA C‰rti‰〶c‰‰‰ Before You Start Prepare a CA c‰rti‰〶c‰‰‰ in advance. Steps 1. Go to System and Maintenance → Safe → C‰rti‰〶c‰‰‰ Management . 2. Create an ID in the Import CA C‰rti‰〶c‰‰‰ area.

  • Page 80: Chapter 8 C‰N‰〶‰‰R‰ The Device Via The Mobile Browser

    DS-K1T502 Series Access Control Terminal User Manual Chapter 8 C‰n‰〶‰‰r‰ the Device via the Mobile Browser Set Network by TCP/IP If device has connected to wired network, set the device IP address and enable the device hotspot via the Web browser. For details, see the PC web browser's ‰‰〷呠n‰‰‰...

  • Page 81: Account Security ‰‰〷呠N

    DS-K1T502 Series Access Control Terminal User Manual Steps 1. On the login page, tap Forget Password. 2. Select ‰‰r‰‰〶c‰ti‰n Mode. Security Q‰‰‰ti‰n ‰‰r‰‰〶c‰ti‰n If you have set security q‰‰‰ti‰n‰ on the device or mobile web, you can enter the answers to reset the password.

  • Page 82: C‰N‰〶‰‰R‰Ti‰N

    DS-K1T502 Series Access Control Terminal User Manual 8.5 C‰n‰〶‰‰r‰ti‰n 8.5.1 View Device ‰n‰‰rm‰ti‰n View the device name, language, model, serial No., version, IO input number, local RS-485 number, number of alarm output, register number, Mac address, and device capacity, etc.

  • Page 83: Set Dst

    DS-K1T502 Series Access Control Terminal User Manual By default, the device tim‰ should be synchronized manually. You can set the device tim‰ manually. Set the NTP server's IP address, port No., and interval. 8.5.3 Set DST Steps 1. Tap → System ‰‰〷呠n‰‰ → Time ‰‰〷呠n‰‰ , to enter the ‰‰〷呠n‰‰ page.

  • Page 84: Wired Network

    DS-K1T502 Series Access Control Terminal User Manual regularly, especially in the high security system, changing the password monthly or weekly can b‰‰〷‰r protect your product. 8.5.5 Network 可配置 有 网 参数、Wi-Fi 参数和 点参数。 Wired Network Set wired network. → C‰mm‰n‰c‰ti‰n ‰‰〷呠n‰‰ → Wired Network to enter the c‰n‰〶‰‰r‰ti‰n page.
  • Page 85 DS-K1T502 Series Access Control Terminal User Manual Enable DHCP Enable DHCP to Auto DNS, the device will allocate the IP and DNS ‰‰‰‰m‰tic‰‰‰y‰ Disable DHCP Manually set the IP and DNS server. 4) Tap Save. Result ‰ft‰r Wi-Fi and WLAN ‰‰〷呠n‰‰‰ you can enter the WLAN IP address in the mobile browser to login the device.

  • Page 86: User Management

    DS-K1T502 Series Access Control Terminal User Manual Note Hik-Connect is an ‰‰‰‰‰c‰ti‰n for mobile devices. With the App, you can view live image of the device, receive alarm n‰ti‰〶c‰ti‰n and so on. 2. Check Enable to enable the ‰‰ncti‰n‰ 3. You can enable Custom to enter the server address.
  • Page 87 DS-K1T502 Series Access Control Terminal User Manual Steps 1. Tap → Person Management to enter the ‰‰〷呠n‰‰ page. 2. Add user. 1) Tap+. Figure 8-3 Add User 2) Set the following parameters. Employee ID Enter the employee ID. The Employee ID cannot be 0 or exceed 32 characters. It can be a c‰mb‰n‰ti‰n of uppercase, lowercase ‰‰‰〷‰r‰...

  • Page 88: Event Search

    DS-K1T502 Series Access Control Terminal User Manual Long-Term ‰‰〶‰ctiv‰ Set the user permission as long-term ‰‰〶‰ctiv‰‰ Start Date/End Date Set Start Date and End Date of user permission. Administrator If the user needs to be set as administrator, you can enable Administrator.

  • Page 89: Audio ‰‰〷呠N

    DS-K1T502 Series Access Control Terminal User Manual 8.5.8 Audio ‰‰〷呠n‰‰ You can enable or adjust the audio. → Audio. Enable Enable Voice Prompt according to actual needs. The device will prompt voice ‰n‰‰r‰cti‰n‰‰ You can also adjust the audio volume.
  • Page 90 DS-K1T502 Series Access Control Terminal User Manual Figure 8-4 ‰‰‰‰‰ntic‰ti‰n ‰‰〷呠n‰‰ 2. Tap Save. Terminal Main Card Reader You can c‰n‰〶‰‰r‰ the device card reader's parameters. If you select main card reader, you need to c‰n‰〶‰‰r‰ the following parameters: Terminal Type, Terminal Model, Enable Card Reader, ‰‰‰‰‰ntic‰ti‰n, R‰c‰‰n‰ti‰n Interval (s), Minimum Card Swiping Interval (s),...
  • Page 91 DS-K1T502 Series Access Control Terminal User Manual Card Reader ‰‰‰cr‰‰ti‰n Get card reader ‰‰‰cr‰‰ti‰n‰ It is read-only. Enable Card Reader Enable the card reader's ‰‰ncti‰n‰ ‰‰‰‰‰ntic‰ti‰n Select an ‰‰‰‰‰ntic‰ti‰n mode according to your actual needs from the drop-down list. ‰‰‰‰‰ntic‰ti‰n Interval You can set the ‰‰‰‰‰ntic‰ti‰n interval of the same person when ‰‰‰‰‰ntic‰tin‰‰...
  • Page 92 DS-K1T502 Series Access Control Terminal User Manual You can set the exit b‰‰〷‰n as Remain Open or Remain Closed according to your actual needs. By default, it is Remain Open. Door Remain Open ‰‰r‰ti‰n with First Person Set the door open ‰‰r‰ti‰n when ‰〶r‰‰ person is in. ‰ft‰r the ‰〶r‰‰ person is authorized, it allows m‰‰ti‰‰‰...

  • Page 93: Terminal Parameters

    DS-K1T502 Series Access Control Terminal User Manual Terminal Parameters You can set terminal parameters for accessing. → Access Control → Terminal Parameters . You can set Working Mode as Access Control Mode. The access control mode is the device normal mode.
  • Page 94 DS-K1T502 Series Access Control Terminal User Manual The stop bit when the devices are c‰mm‰n‰c‰tin‰ via the RS-485 protocol. Parity/Flow C‰r‰‰C‰mm‰n‰c‰ti‰n Mode Enabled by default. Output Type Set the output type according to your actual needs. Set Card Security C‰n‰〶‰‰r‰ cards for the device.
  • Page 95 DS-K1T502 Series Access Control Terminal User Manual Figure 8-5 Card Security C‰n‰〶‰‰r‰ card parameters, and click Save. Enable NFC Card In order to prevent the mobile phone from ‰‰〷呠n‰ the data of the access control, you can disable NFC card to increase the security level of the data.

  • Page 96: Call ‰‰〷呠N

    DS-K1T502 Series Access Control Terminal User Manual Enable the ‰‰ncti‰n and set the ‰ncry‰ti‰n sector. Note It is recommended to encrypt sector 13. Enable EM Card Enable EM card and ‰‰‰‰‰ntic‰tin‰ by ‰r‰‰‰ntin‰ EM card is available. Note If the peripheral card reader supports ‰r‰‰‰ntin‰ EM card, the ‰‰ncti‰n is also supported to enable/disable the EM card ‰‰ncti‰n...
  • Page 97 DS-K1T502 Series Access Control Terminal User Manual Note If the device type is Door ‰‰‰ti‰n or Access Control Device, the No. should be between 0 and ● ‰ft‰r changing the device type or No., you should reboot the device to take ‰‰〶‰c‰‰...
  • Page 98 DS-K1T502 Series Access Control Terminal User Manual Refers to the SIP server IP. Enter the main ‰‰‰ti‰n′‰ IP address that used for c‰mm‰n‰c‰ti‰n‰ At this tim‰ the main ‰‰‰ti‰n is used as a SIP server. Other intercom devices should registered to this server address to realize c‰mm‰n‰c‰ti‰n‰...

  • Page 99: Set Privacy Parameters Via Mobile Web

    DS-K1T502 Series Access Control Terminal User Manual Note When you check Call ‰‰‰c‰‰〶‰‰ Indoor ‰‰‰ti‰n‰ you should set the linked room’s No. ● By default, you can press the b‰‰〷‰n to call indoor ‰‰‰ti‰n‰ and hold the b‰‰〷‰n to call center.

  • Page 100: Restart Device

    DS-K1T502 Series Access Control Terminal User Manual Restart Device → Restart Device . Tap Restart to restart the device. Upgrade → Upgrade . Tap Upgrade to upgrade the device. Note Do not power ‰‰〶 during the upgrading. Restore Parameters → Default .

  • Page 101: Log Out Of Mobile Web

    DS-K1T502 Series Access Control Terminal User Manual 8.5.16 Log Out of Mobile Web Log out of the c‰n‰〶‰‰r‰ti‰n page on the mobile web. On the home page, tap → Log Out , and tap OK to log out of the web.

  • Page 102: Chapter 9 Other ‰‰‰Tf‰Rm‰ To C‰N‰〶‰‰R

    DS-K1T502 Series Access Control Terminal User Manual Chapter 9 Other ‰‰‰tf‰rm‰ to C‰n‰〶‰‰r‰ You can also c‰n‰〶‰‰r‰ the device via iVMS-4200 Client ‰‰ftw‰r‰ or HikCentral Access Control. For details, see the ‰‰‰tf‰rm‰‰ user manual. iVMS-4200 Client ‰‰‰〶w‰r‰ Click/tap the link to view the client ‰‰ftw‰r‰‰‰ user manual.

  • Page 103: Appendix A. Tips For Scanning Fingerprint

    DS-K1T502 Series Access Control Terminal User Manual Appendix A. Tips for Scanning Fingerprint Recommended Finger ‰‰r‰‰〶n‰‰r‰ middle ‰〶n‰‰r or the third ‰〶n‰‰r‰ Correct Scanning The ‰〶‰‰r‰ displayed below is the correct way to scan your ‰〶n‰‰r‰ You should press your ‰〶n‰‰r on the scanner horizontally. The center of your scanned ‰〶n‰‰r should align with the scanner center.
  • Page 104 DS-K1T502 Series Access Control Terminal User Manual Environment The scanner should avoid direct sun light, high temperature, humid c‰n‰‰ti‰n‰ and rain. When it is dry, the scanner may not recognize your ‰〶n‰‰r‰r‰n‰ successfully. You can blow your ‰〶n‰‰r and scan again.

  • Page 105: Appendix B. Dimension

    DS-K1T502 Series Access Control Terminal User Manual Appendix B. Dimension Dimension of Device...
  • Page 106 UD29355B-D...

This manual is also suitable for:

Ds-k1t502dbwx-cDs-k1t502dbfwx-cDs-k1t502dbfwxDs-k1t502dbwx

Table of Contents