HIKVISION DS-K1T671M User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. IP Access Controllers
  5. DS-K1T671 Series
  6. User manual
HIKVISION DS-K1T671M User Manual

HIKVISION DS-K1T671M User Manual

Face recognition terminal
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DS-K1T671 Series Face Recognition Terminal
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-K1T671M and is the answer not in the manual?

Questions and answers

Related Manuals for HIKVISION DS-K1T671M

Summary of Contents for HIKVISION DS-K1T671M

  • Page 1 DS-K1T671 Series Face Recognition Terminal User Manual...

  • Page 2: About This Manual

    WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
  • Page 3 During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method;...

  • Page 4: Symbol Conventions

    DS-K1T671 Series Face Recognition Terminal User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could Caution result in equipment damage, data loss, performance degradation, or...

  • Page 5: Regulatory Information

    DS-K1T671 Series Face Recognition Terminal User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 6 DS-K1T671 Series Face Recognition Terminal User Manual under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.

  • Page 7: Safety Instruction

    DS-K1T671 Series Face Recognition Terminal User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions: Dangers: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage.
  • Page 8 DS-K1T671 Series Face Recognition Terminal User Manual • The device cover for indoor use shall be kept from rain and moisture. • Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger). •...

  • Page 9: Available Models

    DS-K1T671 Series Face Recognition Terminal User Manual Available Models Product Name Model Face Recognition Terminal DS-K1T671M DS-K1T671MF DS-K1T671TM DS-K1T671TMW DS-K1T671TMF DS-K1T671TMFW Use only power supplies listed in the user instructions: Model Manufacturer Standard C2000IC12.0-24P-DE MOSO Power Supply Technology Co., Ltd.

  • Page 10: Table Of Contents

    DS-K1T671 Series Face Recognition Terminal User Manual Contents Chapter 1 Overview ........................1 1.1 Overview ..........................1 1.2 Features ..........................1 Chapter 2 Appearance ........................ 3 Chapter 3 Installation ......................... 5 3.1 Installation Environment ......................5 3.2 Install with Gang Box ......................5 3.3 Install without Gang Box ......................
  • Page 11 DS-K1T671 Series Face Recognition Terminal User Manual 6.5.3 Set RS-485 Parameters ....................32 6.5.4 Set Wiegand Parameters ..................... 32 6.6 User Management ....................... 33 6.6.1 Add Face Picture ......................33 6.6.2 Add Fingerprint ......................35 6.6.3 Add Card ........................36 6.6.4 Add Password ......................
  • Page 12 DS-K1T671 Series Face Recognition Terminal User Manual 6.14.3 Call Device from Client Software ................53 6.14.4 Call Room from Device ....................54 Chapter 7 Operation via Web Browser ..................55 7.1 Login ............................ 55 7.2 Live View ..........................55 7.3 Person Management ......................56 7.4 Search Event ........................
  • Page 13 DS-K1T671 Series Face Recognition Terminal User Manual 8.2.2 Reset Device Password ....................82 8.3 Group Management ......................82 8.3.1 Add Group ........................82 8.3.2 Import Resources to Group ..................83 8.3.3 Edit Resource Parameters ................... 83 8.3.4 Remove Resources from Group .................. 84 8.4 Person Management ......................
  • Page 14 DS-K1T671 Series Face Recognition Terminal User Manual 8.4.22 Set Card Issuing Parameters ..................97 8.5 Configure Schedule and Template ..................98 8.5.1 Add Holiday ......................... 98 8.5.2 Add Template ......................99 8.6 Set Access Group to Assign Access Authorization to Persons ..........101 8.7 Configure Advanced Functions ..................
  • Page 15 DS-K1T671 Series Face Recognition Terminal User Manual 8.11.3 Add Shift ........................142 8.11.4 Manage Shift Schedule ................... 145 8.11.5 Manually Correct Check-in/out Record ..............148 8.11.6 Add Leave and Business Trip ................... 149 8.11.7 Calculate Attendance Data ..................150 8.11.8 Attendance Statistics ....................151 Appendix A.

  • Page 16: Chapter 1 Overview

    DS-K1T671 Series Face Recognition Terminal User Manual Chapter 1 Overview 1.1 Overview Face recognition terminal is a kind of access control device for face recognition, which is mainly applied in security access control systems, such as logistic centers, airports, university campuses, alarm centrals, dwellings, etc.
  • Page 17 DS-K1T671 Series Face Recognition Terminal User Manual Features of Advanced Series • 7-inch LCD touch screen • 2 MP wide-angle dual-lens • Adjusts supplement light brightness manually • Face recognition distance: 0.3 m to 3 m • Suggested height for face recognition: between 1.4 m and 1.9 m •...

  • Page 18: Chapter 2 Appearance

    DS-K1T671 Series Face Recognition Terminal User Manual Chapter 2 Appearance Refer to the following contents for detailed information of the face recognition terminal: Figure 2-1 Face Recognition Terminal Diagram Table 2-1 Description of Face Recognition Terminal Name Description Fingerprint Module For fingerprint recognition.
  • Page 19 DS-K1T671 Series Face Recognition Terminal User Manual Name Description Network Interface Connect to Ethernet. SIM Card Slot Reserved Debugging Port The debug terminal is used for debugging only. Power Interface Connect to power supply. Wiring Terminals Connect to other external devices, including RS- 485 card reader, Wiegand card reader, door lock, alarm input, alarm output, etc.

  • Page 20: Chapter 3 Installation

    DS-K1T671 Series Face Recognition Terminal User Manual Chapter 3 Installation 3.1 Installation Environment • Avoid backlight, direct sunlight, and indirect sunlight. • For better recognition, there should be light source in or near the installation environment. Note For details about installation environment, see Tips for Installation Environment. 3.2 Install with Gang Box Steps 1.
  • Page 21 DS-K1T671 Series Face Recognition Terminal User Manual 2. Drill holes on the wall or other surface according to the mounting template and install the gang box. 3. Use two supplied screws (4_KA4 × 22-SUS) to secure the mounting plate on the gang box. 4.
  • Page 22 DS-K1T671 Series Face Recognition Terminal User Manual Figure 3-4 Insert Fingerprint Module 10. Align the device with the mounting plate and hang the device on the mounting plate. Figure 3-5 Install Device...

  • Page 23: Install Without Gang Box

    DS-K1T671 Series Face Recognition Terminal User Manual 11. Use two supplied screws (SC-M4 × 12TP10-SUS) to secure the device and the mounting plate. Figure 3-6 Secure Device Note • The installation height here is the recommended height. You can change it according to your actual needs.
  • Page 24 DS-K1T671 Series Face Recognition Terminal User Manual Figure 3-7 Mounting Template 2. Drill 6 holes on the wall or other surface according to Hole 1 and Hole 2 in the mounting template. 3. Insert the screw sockets of the setscrews in the drilled holes. Figure 3-8 Insert Screw Socket 4.
  • Page 25 DS-K1T671 Series Face Recognition Terminal User Manual Figure 3-9 Install Mounting Plate 5. Remove the two screws on the rear panel and remove the sheet to display the wiring terminals. 6. Route the cable through the cable hole of the mounting plate, and connect to corresponding external devices' cables.
  • Page 26 DS-K1T671 Series Face Recognition Terminal User Manual Figure 3-10 Apply Silicone Sealant 9. Insert the fingerprint module to the holes at the bottom of the main part. Figure 3-11 Install Fingerprint Module 10. Align the device with the mounting plate and hang the device on the mounting plate.
  • Page 27 DS-K1T671 Series Face Recognition Terminal User Manual Figure 3-12 Install Device 11. Use two supplied screws (SC-M4 × 12TP10-SUS) to secure the device and the mounting plate.
  • Page 28 DS-K1T671 Series Face Recognition Terminal User Manual Figure 3-13 Secure Device Note • The installation height here is the recommended height. You can change it according to your actual needs. • For easy installation, drill holes on mounting surface according to the supplied mounting template.

  • Page 29: Chapter 4 Wiring

    DS-K1T671 Series Face Recognition Terminal User Manual Chapter 4 Wiring You can connect the RS-485 terminal with the RS-485 card reader, connect the NC and COM terminal with the door lock, connect the SENSOR terminal with the door contact, the BTN/GND terminal with the exit button, connect the alarm output and input terminal with the alarm output/ input devices, and connect the Wiegand terminal with the Wiegand card reader or the access controller.
  • Page 30 DS-K1T671 Series Face Recognition Terminal User Manual Figure 4-1 Terminal Diagram The descriptions of the terminals are as follows: Table 4-1 Terminal Descriptions Group Function Color Name Description Group A Power Input +12 V 12 VDC Power Supply Black Ground Group B Alarm Input Yellow/Blue...

  • Page 31: Wire Normal Device

    DS-K1T671 Series Face Recognition Terminal User Manual Group Function Color Name Description Alarm Output Yellow/Purple Alarm Output Wiring Yellow/Brown Yellow/Red Group C RS-485 Yellow 485+ RS-485 Wiring Blue 485- Black Ground Wiegand Green Wiegand Wiring 0 White Wiegand Wiring 1 Brown WG_OK Wiegand...

  • Page 32: Wire Secure Door Control Unit

    DS-K1T671 Series Face Recognition Terminal User Manual Figure 4-2 Device Wiring Note • You should set the face recognition terminal's Wiegand direction to "Input" to connect to a Wiegand card reader. If connects to an access controller, you should set the Wiegand direction to "Output"...
  • Page 33 DS-K1T671 Series Face Recognition Terminal User Manual Figure 4-3 Secure Door Control Unit Wiring Note The secure door control unit should connect to an external power supply separately. The suggested external power supply is 12V, 0.5A.

  • Page 34: Chapter 5 Activation

    DS-K1T671 Series Face Recognition Terminal User Manual Chapter 5 Activation You should activate the device before the first login. After powering on the device, the system will switch to Device Activation page. Activation via the device, SADP tool and the client software are supported. The default values of the device are as follows: •...
  • Page 35 DS-K1T671 Series Face Recognition Terminal User Manual Figure 5-1 Activation Page Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 36: Activate Via Sadp

    • Get the SADP software from the supplied disk or the official website http:// www.hikvision.com/en/ , and install the SADP according to the prompts. • The device and the PC that runs the SADP tool should be within the same subnet.

  • Page 37: Activate Device Via Client Software

    DS-K1T671 Series Face Recognition Terminal User Manual 5.3 Activate Device via Client Software For some devices, you are required to create the password to activate them before they can be added to the software and work properly. Steps Note This function should be supported by the device. 1.

  • Page 38: Chapter 6 Basic Operation

    DS-K1T671 Series Face Recognition Terminal User Manual Chapter 6 Basic Operation 6.1 Select Language You can select a language for the device system. After the device activation, you can select a language for the device system. Figure 6-1 Select System Language By default, the system language is English.
  • Page 39 DS-K1T671 Series Face Recognition Terminal User Manual Steps 1. On the Welcome page, select Indoor or Others from the drop-down list. Figure 6-2 Welcome Page 2. Tap OK to save. Note • You can also change the settings in System Settings. •...

  • Page 40: Set Administrator

    DS-K1T671 Series Face Recognition Terminal User Manual 6.3 Set Administrator After device activation, you can add an administrator to manage the backend. Before You Start Activate the device and select an application mode. Steps Note Tap Skip to skip adding administrator. 1.
  • Page 41 DS-K1T671 Series Face Recognition Terminal User Manual Note Up to one credential should be added. : Face forward at the camera. Make sure the face is in the face recognition area. Click to capture and click to confirm. : Press your finger according to the instructions on the device screen. Click to confirm.

  • Page 42: Login

    DS-K1T671 Series Face Recognition Terminal User Manual 6.4 Login Login the device backend to set the device basic parameters. 6.4.1 Login by Administrator If you have added an administrator for the device, only the administrator can login the device for device operation.

  • Page 43: Login By Activation Password

    DS-K1T671 Series Face Recognition Terminal User Manual Figure 6-5 Home Page Note The device will be locked for 30 minutes after 5 failed fingerprint or card attempts. 3. Optional: Tap and you can enter the device activation password for login. 4.

  • Page 44: Communication Settings

    DS-K1T671 Series Face Recognition Terminal User Manual 2. Tap the Password field and enter the device activation password. 3. Tap OK to enter the home page. Note The device will be locked for 30 minutes after 5 failed password attempts. Figure 6-6 Home Page 6.5 Communication Settings You can set the network parameters, the Wi-Fi parameter, and the RS-485 parameters on the...

  • Page 45: Set Wired Network Parameters

    DS-K1T671 Series Face Recognition Terminal User Manual 6.5.1 Set Wired Network Parameters You can set the device wired network parameters, including the IP address, the subnet mask, and the gateway. Steps 1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings page.
  • Page 46 DS-K1T671 Series Face Recognition Terminal User Manual Figure 6-8 Wi-Fi Settings 3. Enable the Wi-Fi function. 4. Configure the Wi-Fi parameters. - Select a Wi-Fi from the list, and enter the Wi-Fi's password. Tap OK. - If the target Wi-Fi is not in the list,tap Add Wi-Fi. Enter the Wi-Fi's name and password. And tap OK.

  • Page 47: Set Rs-485 Parameters

    DS-K1T671 Series Face Recognition Terminal User Manual 6.5.3 Set RS-485 Parameters The face recognition terminal can connect external access controller, secure door control unit or card reader via the RS-485 terminal. Steps 1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings page.

  • Page 48: User Management

    DS-K1T671 Series Face Recognition Terminal User Manual Figure 6-10 Wiegand Settings 3. Enable the Wiegand function. 4. Select a transmission direction. • Output: A face recognition terminal can connect an external access controller. And the two devices will transmit the card No. via Wiegand 26 or Wiegand 34. •...
  • Page 49 DS-K1T671 Series Face Recognition Terminal User Manual Note • Numbers, upper case letters, lower case letters, and special characters are allowed in the user name. • The suggested user name should be within 32 characters. 5. Tap the Face Picture field to enter the face picture adding page. Figure 6-11 Add Face Picture 6.

  • Page 50: Add Fingerprint

    DS-K1T671 Series Face Recognition Terminal User Manual After completely adding the face picture, a captured face picture will be displayed at the upper right corner of the page. 7. Tap Save to save the face picture. 8. Optional: Tap Try Again and adjust your face position to add the face picture again. 9.

  • Page 51: Add Card

    DS-K1T671 Series Face Recognition Terminal User Manual Note • The same fingerprint cannot be repeatedly added. • Up to 10 fingerprints can be added for one user. • You can also use the client software or the fingerprint recorder to record fingerprints. For details about the instructions of scanning fingerprints, see Tips for Scanning Fingerprint .

  • Page 52: Add Password

    DS-K1T671 Series Face Recognition Terminal User Manual Note • The card No. cannot be empty. • Up to 20 characters are allowed in the card No. • The card No. cannot be duplicated. 8. Configure the card type. 9. Set the user role. Administrator The user is the administrator.

  • Page 53: Set Authentication Mode

    DS-K1T671 Series Face Recognition Terminal User Manual 6. Set the user role. Administrator The user is the administrator. Except for the normal attendance function, the user can also enter the Home page to operate after authenticating the permission. Normal User The User is the normal user.

  • Page 54: Data Management

    DS-K1T671 Series Face Recognition Terminal User Manual Note The employee ID cannot be edited. 6.7 Data Management You can delete data, import data, and export data. 6.7.1 Delete Data Delete user data. On the Home page, tap Data → Delete Data → User Data . All user data added in the device will be deleted.

  • Page 55: Export Data

    DS-K1T671 Series Face Recognition Terminal User Manual 6.7.3 Export Data Steps 1. On the Home page, tap Data → Export Data . 2. Tap Event Data, User Data, or Face Data 3. Optional: Create a password for exporting. When you should import those data to another device, you should enter the password.

  • Page 56: Authenticate Via Multiple Credential

    DS-K1T671 Series Face Recognition Terminal User Manual Note The card can be normal IC card, or encrypted card. QR Code Put the QR code in front of the device camera to authenticate via QR code. Note Authentication via QR code should be supported by the device. If authentication completed, a prompt "Authenticated"...
  • Page 57 DS-K1T671 Series Face Recognition Terminal User Manual Figure 6-12 Basic Settings Page shortcut key, voice, time, community No., building No., and Unit No. Shortcut Key Choose the shortcut key that displayed on the authentication page, including the QR code function, the call function, call type, and the password entering function. Note You can select call type from Call Room, Call Center, and Call Specified Room No.

  • Page 58: Set Biometric Parameters

    DS-K1T671 Series Face Recognition Terminal User Manual Note You can set the voice volume between 0 and 10. Time Settings Set the time zone, the device time and the DST. Select Language Select the system language. After the language is changed, the system will reboot to take effect. White Light Brightness Adjust the white light's brightness.
  • Page 59 DS-K1T671 Series Face Recognition Terminal User Manual Figure 6-13 Biometric Parameters Page Table 6-1 Face Picture Parameters Parameter Description Select Application You can select either others or indoor according to actual environment. Mode Face Liveness Level You can set the face anti-​ s poofing matching security level when performing live face authentication.

  • Page 60: Set Access Control Parameters

    DS-K1T671 Series Face Recognition Terminal User Manual Parameter Description Note You can input the number from 1 to 10. Wide Dynamic When there are both very bright and very dark areas simultaneously in the view, you can enable the wide dynamic function to balance the brightness of the whole image and provide clear images with details.
  • Page 61 DS-K1T671 Series Face Recognition Terminal User Manual Figure 6-14 Access Control Parameters The available parameters descriptions are as follows: Table 6-2 Access Control Parameters Descriptions Parameter Description Terminal Auth. Mode (Terminal Select the face recognition terminal's authentication mode. You Authentication Mode) can also customize the authentication mode.

  • Page 62: Time And Attendance Status Settings

    DS-K1T671 Series Face Recognition Terminal User Manual Parameter Description Door Contact You can select "Open (Remain Open)" or "Close (Remian Closed)" according to your actual needs. By default, it is Close (Remian Closed). Open Duration Set the door unlocking duration. If the door is not opened for the set time, the door will be locked.

  • Page 63: Set Auto Attendance Via Device

    DS-K1T671 Series Face Recognition Terminal User Manual Steps 1. Tap T&A Status to enter the T&A Status page. 2. Set the Attendance Mode as Manual. Figure 6-16 Manual Attendance Mode 3. Enable the Attendance Status function. Result You should select the attendance status manually after authentication. Note If you do not select a status, the authentication will be failed and it will not be marked as a valid attendance.
  • Page 64 DS-K1T671 Series Face Recognition Terminal User Manual Figure 6-17 Auto Attendance Mode 3. Select an attendance status and set its schedule. 1) Select Check In, Check Out, Break Out, Break In, Overtime In, or Overtime Out as the attendance status. 2) Tap Schedule.

  • Page 65: Set Manual And Auto Attendance Via Device

    DS-K1T671 Series Face Recognition Terminal User Manual 6.12.4 Set Manual and Auto Attendance via Device Set the attendance mode as Manual and Auto, and the system will automatically change the attendance status according to the configured parameters. At the same time you can manually change the attendance status after the authentication.

  • Page 66: System Maintenance

    DS-K1T671 Series Face Recognition Terminal User Manual Result On the initial page and authenticate. If you do not select a status, the authentication will be marked as the configured attendance status according to the schedule. If you tap Select Status and select a status to take attendance, the authentication will be marked as the selected attendance status.

  • Page 67: Video Intercom

    DS-K1T671 Series Face Recognition Terminal User Manual Note Parts of the device models support displaying the fingerprint number. Refers to the actual page for details. Device Upgrade Plug the USB flash drive in the device USB interface. Tap Upgrade, and the device will read the digicap.dav file in the USB flash drive to start upgrading.

  • Page 68: Call Center From Device

    DS-K1T671 Series Face Recognition Terminal User Manual Note If the device is added to multiple client softwares and when the device is calling the client software, only the first client software added the device will pop up the call receiving window. 6.14.2 Call Center from Device Steps 1.

  • Page 69: Call Room From Device

    DS-K1T671 Series Face Recognition Terminal User Manual 5. Enter the Live View page and double-click the added device to start live view. Note For details about operations in the Live View page, see Live View in the user manual of the client software.

  • Page 70: Chapter 7 Operation Via Web Browser

    DS-K1T671 Series Face Recognition Terminal User Manual Chapter 7 Operation via Web Browser 7.1 Login You can login via the web browser or the remote configuration of the client software. Note Make sure the device is activated. For detailed information about activation, see Activation . Login via Web Browser Enter the device IP address in the address bar of the web browser and press Enter to enter the login page.

  • Page 71: Person Management

    DS-K1T671 Series Face Recognition Terminal User Manual Set the volume when starting live view. Note If you adjust the volume when starting two-way audio, you may hear a repeated sounds. You can capture image when starting live view. Reserved function. You can zoom in the live view image. Unlock the linked door.

  • Page 72: Search Event

    DS-K1T671 Series Face Recognition Terminal User Manual Click Save to save the settings. Add Face Picture Click User → Add to enter the Add Person page. Click + on the right to upload a face picture from the local PC. Note The picture format should be JPEG and the size should be less than 200K.

  • Page 73: Configuration

    DS-K1T671 Series Face Recognition Terminal User Manual Enter the search conditions, including the employee ID, the name, the card No., the start time, and the end time, and click Search. The results will be displayed on the right panel. 7.5 Configuration 7.5.1 Set Local Parameters Set the live view parameters, record file saving path, and captured pictures saving path.

  • Page 74: Set Dst

    DS-K1T671 Series Face Recognition Terminal User Manual Figure 7-3 Time Settings Click Save to save the settings after the configuration. Time Zone Select the device located time zone from the drop-down list. Time Sync. You should set the NTP server's IP address, port No., and interval. Manual By default, the device time should be synchronized manually.
  • Page 75 DS-K1T671 Series Face Recognition Terminal User Manual Figure 7-5 Upgrade and Maintenance Page Click Reboot to start reboot the device. Restore Parameters Click Configuration → System → Maintenance → Upgrade & Maintenance . Factory All parameters will be restored to the factory settings. You should activate the device before usage.

  • Page 76: Change Administrator's Password

    DS-K1T671 Series Face Recognition Terminal User Manual Note Do not power off during the upgrading. 7.5.6 Change Administrator's Password Steps 1. Click Configuration → User Management . 2. Click 3. Enter the old password and create a new password. 4. Confirm the new password. 5.
  • Page 77 DS-K1T671 Series Face Recognition Terminal User Manual Figure 7-6 TCP/IP Settings Page Click Save to save the settings. NIC Type Select a NIC type from the drop-down list. By default, it is Auto. DHCP If uncheck the function, you should set the IPv4 address, IPv4 subnet mask, IPv4 default gateway, MTU, and the device port.

  • Page 78: Set Video And Audio Parameters

    DS-K1T671 Series Face Recognition Terminal User Manual Set Wi-Fi Parameters Set the Wi-Fi parameters for device wireless connection. Steps Note The function should be supported by the device. 1. Click Configuration → Network → Basic Settings → Wi-Fi . Figure 7-7 Wi-Fi Settings Page 2.

  • Page 79: Set Video Intercom Parameters

    DS-K1T671 Series Face Recognition Terminal User Manual Figure 7-8 Video Settings Page Set the stream type, the video type, the bitrate type, the frame rate, and the Max. bitrate. Click Save to save the settings after the configuration. Set Audio Parameters Click Configuration →...

  • Page 80: Set Access Control And Authentication Parameters

    DS-K1T671 Series Face Recognition Terminal User Manual Set the device installed community No. Building No. Set the device installed building No. Unit No. Set the device installed unit No. Floor No. Set the device installed floor No. If you select outer door station as the device type, you should enter a number between 1 and Note If you change the No., you should reboot the device.

  • Page 81: Set Rs-485 Parameters

    DS-K1T671 Series Face Recognition Terminal User Manual Set the door unlocking duration. If the door is not opened for the set time, the door will be locked. Open Timeout Alarm (Door Open Timeout Alarm) An alarm will be triggered if the door has not been closed within the configured time duration. Set Authentication Parameters Click Configuration →...

  • Page 82: Set Wiegand Parameters

    DS-K1T671 Series Face Recognition Terminal User Manual Select a peripheral from the drop-down list according the actual situation. You can select from Card Reader, Extension Module, Access Controller, or Disable. Note After the peripheral is changed and saved, the device will reboot automatically. RS-485 Address Set the RS-485 Address according to your actual needs.

  • Page 83: Set Image Parameters

    DS-K1T671 Series Face Recognition Terminal User Manual The device can connect a Wiegand card reader. Output The can connect an external access controller. And the two devices will transmit the card No. via Wiegand 26 or 34. 4. Click Save to save the settings. Note If you change the peripheral, and after you save the device parameters, the device will reboot automatically.

  • Page 84: Set Supplement Light Brightness

    DS-K1T671 Series Face Recognition Terminal User Manual Enable or disable the WDR function. When there are both very bright and very dark areas simultaneously in the view, WDR balances the brightness level of the whole image and provide clear images with details. Brightness/Contrast/Saturation/Sharpness Drag the block or enter the value to adjust the live video's brightness, contrast, saturation, and sharpness.
  • Page 85 DS-K1T671 Series Face Recognition Terminal User Manual Figure 7-16 Smart Settings Page Click Save to save the settings after the configuration. Face Anti-spoofing Enable or disable the live face detection function. If enabling the function, the device can recognize whether the person is a live one or not. Note Biometric recognition products are not 100% applicable to anti-spoofing environments.

  • Page 86: Set Notice Publication

    DS-K1T671 Series Face Recognition Terminal User Manual Pitch Angle The maximum pitch angle when starting face authentication. Yaw Angle The maximum yaw angle when starting face authentication. 1:1 Matching Threshold Set the matching threshold when authenticating via 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate.
  • Page 87 DS-K1T671 Series Face Recognition Terminal User Manual Figure 7-17 Notice Page Sleep Enable Sleep and the device will enter the sleep mode when no operation with the configured sleep time. Customize Screen Saver Enable the function, and you can upload the screen saver pictures from the local PC. You can also set the slide show interval for the screen saver.

  • Page 88: Chapter 8 Client Software Configuration

    DS-K1T671 Series Face Recognition Terminal User Manual Chapter 8 Client Software Configuration 8.1 Configuration Flow of Client Software Follow the flow diagram below to configure on the client software. Figure 8-1 Flow Diagram of Configuration on Client Software 8.2 Device Management You can manage devices on the client, including adding, editing, and deleting the devices.
  • Page 89 DS-K1T671 Series Face Recognition Terminal User Manual Add Online Device The active online devices in the same local subnet with the client software will be displayed on the Online Device area. Note • You can click Refresh per 60s to refresh the information of the online devices. •...
  • Page 90 DS-K1T671 Series Face Recognition Terminal User Manual Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
  • Page 91 DS-K1T671 Series Face Recognition Terminal User Manual Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
  • Page 92 DS-K1T671 Series Face Recognition Terminal User Manual Enter the device password. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
  • Page 93 DS-K1T671 Series Face Recognition Terminal User Manual Delete Device Select one or multiple devices and click Delete to delete the selected device(s) from the client. Add Devices by IP Segment If the devices share the same port No., user name and password, and their IP addresses are sharing an IP segment.
  • Page 94 DS-K1T671 Series Face Recognition Terminal User Manual Note • This function should be supported by the device. • You can log into the device to get the certificate file by web browser. 7. Check Synchronize Time to synchronize the device time with the PC running the client after adding the device to the client.
  • Page 95 DS-K1T671 Series Face Recognition Terminal User Manual 2. Click Add to open the Add window. 3. Select EHome as the adding mode. 4. Enter the required information. Device Account Enter the account name registered on EHome protocol. EHome Key For EHome 5.0 devices, enter the EHome key if you have set it when configuring network center parameter for the device.
  • Page 96 DS-K1T671 Series Face Recognition Terminal User Manual 2. Click Add to open the adding device window. 3. Select Batch Import as the adding mode. 4. Click Export Template and then save the pre-defined template (CSV file) on your PC. 5. Open the exported template file and enter the required information of the devices to be added on the corresponding column.

  • Page 97: Reset Device Password

    DS-K1T671 Series Face Recognition Terminal User Manual 8.2.2 Reset Device Password If you forgot the password of the detected online devices, you can reset the device password through the client. Steps 1. Enter Device Management page. 2. Click Online Device to show the online device area. All the online devices in the same subnet will display in the list.

  • Page 98: Import Resources To Group

    DS-K1T671 Series Face Recognition Terminal User Manual 2. Click Device Management → Group to enter the group management page. 3. Create a group. - Click Add Group and enter a group name as you want. - Click Create Group by Device Name and select an added device to create a new group by the name of the selected device.

  • Page 99: Remove Resources From Group

    DS-K1T671 Series Face Recognition Terminal User Manual 3. Select a group on the group list and click Access Point. The access points imported to the group will display. 4. Click in the Operation column to open the Edit Resource window. 5.

  • Page 100: Configure Basic Information

    DS-K1T671 Series Face Recognition Terminal User Manual Note • The lower-level organizations will be deleted as well if you delete an organization. • Make sure there is no person added under the organization, or the organization cannot be deleted. Show Persons in Check Show Persons in Sub Organization and select an organization to Sub Organization show persons in its sub organizations.
  • Page 101 DS-K1T671 Series Face Recognition Terminal User Manual Note Enter the person's basic information first. For details about configuring person's basic information, refer to Configure Basic Information . 3. In the Credential → Card area, click +. 4. Click Settings to enter the Settings page. 5.

  • Page 102: Upload A Face Photo From Local Pc

    DS-K1T671 Series Face Recognition Terminal User Manual Buzzing Enable or disable the buzzing when the card number is read successfully. Card No. Type Select the type of the card number according to actual needs. M1 Card Encryption This field is only available when the model is DS-K1F100-D8, DS-K1F100-D8E, or DS-K1F180- D8E.

  • Page 103: Take A Photo Via Client

    DS-K1T671 Series Face Recognition Terminal User Manual 8.4.5 Take a Photo via Client When adding person, you can take a photo of the person by the webcam of the PC running the client and set this photo as the person's profile. Before You Start Add at least one access control device checking whether the face in the photo can be recognized by the facial recognition device managed by the client.

  • Page 104: Collect Fingerprint Via Client

    DS-K1T671 Series Face Recognition Terminal User Manual 3. Click Add Face in the Basic Information panel. 4. Select Remote Collection. 5. Select an access control device which supports face recognition function from the drop-down list. 6. Collect face. 1) Face to the camera of the selected access control device and make sure your face is in the middle of the collecting window.

  • Page 105: Collect Fingerprint Via Access Control Device

    DS-K1T671 Series Face Recognition Terminal User Manual Note Once the fingerprint is added, the fingerprint type cannot be changed. 8.4.8 Collect Fingerprint via Access Control Device When adding person, you can collect fingerprint information via the access control device's fingerprint module. The fingerprints recorded can be used as credentials of the persons to access the authorized doors.
  • Page 106 DS-K1T671 Series Face Recognition Terminal User Manual 2. Select an organization in the organization list to add the person and click Add. 3. In the Access Control area, set the person's access control properties. Access Group You can select one or more access groups for the person to give him/her the authorization to the selected access points.

  • Page 107: Customize Person Information

    DS-K1T671 Series Face Recognition Terminal User Manual 8.4.10 Customize Person Information You can customize the person properties which are not pre-defined in the client according to actual needs, e.g., place of birth. After customizing, when add a person, you can enter the custom information to make the person information complete.

  • Page 108: Configure Additional Information

    DS-K1T671 Series Face Recognition Terminal User Manual 5. Confirm to add the person. - Click Add to add the person and close the Add Person window. - Click Add and New to add the person and continue to add other persons. 8.4.12 Configure Additional Information When adding person, you can configure the additional information for the person, such as person's identity type, identity No., country, etc., according to actual needs.

  • Page 109: Import Person Pictures

    DS-K1T671 Series Face Recognition Terminal User Manual Note • If the person has multiple cards, separate the card No. with semicolon. • Items with asterisk are required. • By default, the Hire Date is the current date. 7. Click to select the CSV file with person information. 8.

  • Page 110: Export Person Information

    DS-K1T671 Series Face Recognition Terminal User Manual 8.4.16 Export Person Information You can export the added persons' information to local PC as a CSV file. Before You Start Make sure you have added persons to an organization. Steps 1. Enter the Person module. 2.

  • Page 111: Move Persons To Another Organization

    DS-K1T671 Series Face Recognition Terminal User Manual Steps Note • If the person name stored in the device is empty, the person name will be filled with the issued card No. after importing to the client. • The gender of the persons will be Male by default. •...

  • Page 112: Report Card Loss

    DS-K1T671 Series Face Recognition Terminal User Manual 4. Click Initialize to initialize the card enrollment station or card reader to make it ready for issuing cards. 5. Click the card number column and enter the card number. - Place the card on the card enrollment station. - Swipe the card on the card reader.

  • Page 113: Configure Schedule And Template

    DS-K1T671 Series Face Recognition Terminal User Manual Card Enrollment Station Select the model of the connected card enrollment station Note Currently, the supported card enrollment station models include DS-K1F100-D8, DS-K1F100-M, DS-K1F100-D8E, and DS-K1F180-D8E. Card Type This field is only available when the model is DS-K1F100-D8E or DS-K1F180-D8E. Select the card type as EM card or IC card according to the actual card type.

  • Page 114: Add Template

    DS-K1T671 Series Face Recognition Terminal User Manual Steps Note You can add up to 64 holidays in the software system. 1. Click Access Control → Schedule → Holiday to enter the Holiday page. 2. Click Add on the left panel. 3.
  • Page 115 DS-K1T671 Series Face Recognition Terminal User Manual 1. Click Access Control → Schedule → Template to enter the Template page. Note There are two default templates: All-Day Authorized and All-Day Denied, and they cannot be edited or deleted. All-Day Authorized The access authorization is valid in each day of the week and it has no holiday.

  • Page 116: Set Access Group To Assign Access Authorization To Persons

    DS-K1T671 Series Face Recognition Terminal User Manual 8.6 Set Access Group to Assign Access Authorization to Persons After adding the person and configuring the person's credentials, you can create the access groups to define which person(s) can get access to which door(s) and then apply the access group to the access control device to take effect.
  • Page 117 DS-K1T671 Series Face Recognition Terminal User Manual Figure 8-3 Display the Selected Person(s) and Access Point(s) 8. After adding the access groups, you need to apply them to the access control device to take effect. 1) Select the access group(s) to apply to the access control device. 2) Click Apply All to Devices start applying all the selected access group(s) to the access control device or door station.

  • Page 118: Configure Advanced Functions

    DS-K1T671 Series Face Recognition Terminal User Manual You can click the prompt to apply the changed data to the device. You can select either Apply Now or Apply Later. Figure 8-5 Data Synchronization 8.7 Configure Advanced Functions You can configure the advanced functions of access control to meet some special requirements in different scene.
  • Page 119 DS-K1T671 Series Face Recognition Terminal User Manual 2. Select an access device to show its parameters on the right page. 3. Turn the switch to ON to enable the corresponding functions. Note • The displayed parameters may vary for different access control devices. •...
  • Page 120 DS-K1T671 Series Face Recognition Terminal User Manual Configure Parameters for Door After adding the access control device, you can configure its access point door parameters. Steps 1. Click Access Control → Advanced Function → Device Parameter . 2. Select an access control device on the left panel, and then click to show the doors of the selected device.
  • Page 121 DS-K1T671 Series Face Recognition Terminal User Manual Note • The duress code and the super code should be different. • The duress code and super password should be different from the authentication password. • The length of duress code and the super password is according to the device, usually it should contains 4 to 8 digits.
  • Page 122 DS-K1T671 Series Face Recognition Terminal User Manual Alarm of Max. Failed Attempts Enable to report alarm when the card reading attempts reach the set value. Max. Times of Card Failure Set the max. failure attempts of reading card. Tampering Detection Enable the anti-tamper detection for the card reader.

  • Page 123: Configure Parameters For Alarm Output

    DS-K1T671 Series Face Recognition Terminal User Manual Application Mode You can select indoor or others application modes according to actual environment. Lock Authentication Failed Face After enabling the Live Face Detection function, the system will lock the user's face for 5 minutes if the live face detection is failed for more than the configured attempts.

  • Page 124: Configure Remaining Open/Closed

    DS-K1T671 Series Face Recognition Terminal User Manual 8.7.2 Configure Remaining Open/Closed You can set the status of the door as open or closed. For example, you can set the door remaining closed in the holiday, and set the door remaining open in the specified period of the work day. Before You Start Add the access control devices to the system.

  • Page 125: Configure Multi-Factor Authentication

    DS-K1T671 Series Face Recognition Terminal User Manual Note Up to 8 time durations can be set to one holiday period. 5) Perform the following operations to edit the time durations. • Move the cursor to the time duration and drag the time duration on the timeline bar to the desired position when the cursor turns to •...
  • Page 126 DS-K1T671 Series Face Recognition Terminal User Manual 7) Optional: Select the person/card group(s), and then click Apply to re-apply access group that failed to be applied previously to the access control device. 4. Select an access control point (door) of selected device on the left panel. 5.

  • Page 127: Configure Card Reader Authentication Mode And Schedule

    DS-K1T671 Series Face Recognition Terminal User Manual Note • The authentication times should be larger than 0 and smaller than the added personnel quantity in the personnel group. • The maximum value of authentication times is 16. 6) Click Save. Note •...
  • Page 128 DS-K1T671 Series Face Recognition Terminal User Manual Figure 8-7 Select Card Reader Authentication Mode Note PIN refers to the PIN code set to open the door. Refer to Configure Access Control Information . 2) Check the modes in the Available Mode list and they will be added to the selected modes list.

  • Page 129: Configure First Person In

    DS-K1T671 Series Face Recognition Terminal User Manual Figure 8-8 Set Authentication Modes for Card Readers 6. Optional: Select a configured day and click Copy to Week to copy the same settings to the whole week. 7. Optional: Click Copy to to copy the settings to other card readers. 8.

  • Page 130: Configure Anti-Passback

    DS-K1T671 Series Face Recognition Terminal User Manual Note The remain open duration should be between 0 and 1440 minutes. By default, the remain open duration is 10 minutes. Disable Remaining Open after First Person Disable the function of first person in, namely normal authentication. Note You can authenticate by the first person again to disable the first person mode.

  • Page 131: Configure Device Parameters

    DS-K1T671 Series Face Recognition Terminal User Manual 6. Click OK in the dialog to save the selections. 7. Click Save in the Anti-Passback Settings page to save the settings and take effect. Example Set Card Swiping Path If you select Reader In_01 as the beginning, and select Reader In_02, Reader Out_04 as the linked card readers.
  • Page 132 DS-K1T671 Series Face Recognition Terminal User Manual Set Log Uploading Mode You can set the mode for the device to upload logs via EHome protocol. Steps Note Make sure the device is not added by EHome. 1. Enter the Access Control module. 2.
  • Page 133 DS-K1T671 Series Face Recognition Terminal User Manual Note The port number of the wireless network and wired network should be consistent with the port number of EHome. 8. Select the Protocol Type as EHome. 9. Set an account name for the network center. 10.
  • Page 134 DS-K1T671 Series Face Recognition Terminal User Manual 7. Click Save. Set Manual Capture Parameters In Status Monitoring module, you can capture a picture manually the access control device's camera by clicking a button. Before that, you need to set the parameters for the capture such as picture quality.
  • Page 135 DS-K1T671 Series Face Recognition Terminal User Manual Save Authenticating Face Picture If enabled, the captured face picture when authenticating will be saved on the device. ECO Mode After enabling the ECO mode, the device can authenticate faces in the low light or dark environment.

  • Page 136: Set Wiegand Parameters

    DS-K1T671 Series Face Recognition Terminal User Manual Set RS-485 Parameters You can set the access control device's RS-485 parameters including the baud rate, data bit, the stop bit, parity type, flow control type, communication mode, work mode, and connection mode. Steps Note The RS-485 Settings should be supported by the device.

  • Page 137: Configure Linkage Actions For Access Control

    DS-K1T671 Series Face Recognition Terminal User Manual Note If you set Communication Direction as Sending, you are required to set the Wiegand Mode as Wiegand 26 or Wiegand 34. 6. Check Enable Wiegand to enable the Wiegand function. 7. Click Save. •...

  • Page 138: Configure Device Actions For Access Event

    DS-K1T671 Series Face Recognition Terminal User Manual 1) Select the event(s) and click Edit Linkage to set the client actions when the events triggered. Audible Warning The client software gives an audible warning when alarm is triggered. You can select the alarm sound for audible warning.

  • Page 139: Configure Device Actions For Card Swiping

    DS-K1T671 Series Face Recognition Terminal User Manual An event-related picture will be captured when the selected event happens. Note The device should support recording. Buzzer on Reader The audible warning of card reader will be triggered. Alarm Output The alarm output will be triggered for notification when the selected event happens Alarm Input Arm or disarm the alarm input.
  • Page 140 DS-K1T671 Series Face Recognition Terminal User Manual 1. Click Access Control → Linkage Configuration . 2. Select the access control device from the list on the left. 3. Click Add to add a new linkage. 4. Select Card Linkage as the event source. 5.

  • Page 141: Configure Device Actions For Person Id

    DS-K1T671 Series Face Recognition Terminal User Manual Edit Linkage Select the configured linkage settings in the device list and you can edit Settings its event source parameters, including event source and linkage target. 8.8.4 Configure Device Actions for Person ID You can set the access control device's linkage actions for the specified person ID.

  • Page 142: Door Control

    DS-K1T671 Series Face Recognition Terminal User Manual Access Point The door status of open, close, remain open, or remain closed will be triggered. Audio Play The audio prompt will be triggered. And the select audio index related audio content will be played according to the configured play mode.

  • Page 143: Check Real-Time Access Records

    DS-K1T671 Series Face Recognition Terminal User Manual Open Door When the door is locked, unlock it and it will be open for once. After the open duration, the door will be closed and locked again automatically. Close Door When the door is unlocked, lock it and it will be closed. The person who has the access authorization can access the door with credentials.

  • Page 144: Event Center

    DS-K1T671 Series Face Recognition Terminal User Manual 4. Optional: Click the event to view the accessed person details, including person pictures (captured picture and profile), person No., person name, organization, phone, contact address, etc. Note You can double click the captured picture to enlarge it to view the details. 5.
  • Page 145 DS-K1T671 Series Face Recognition Terminal User Manual Steps 1. Click Event Center → Real-time Event to enter the real-time event page and you can view the real-time events received by the client. Event Time For video device, event time is the client time when it receives the event. For none-video device, event time is the time when the event is triggered.
  • Page 146 DS-K1T671 Series Face Recognition Terminal User Manual Figure 8-10 Customize Event Related Items to be Displayed 4. View the event information details. 1) Select an event in the event list. 2) Click Expand in the right-lower corner of the page. 3) View the related picture, detail description and handing records of the event.

  • Page 147: Search Historical Events

    DS-K1T671 Series Face Recognition Terminal User Manual Note You should configure the email parameters first, see Set Email Parameters in the user manual of client software for details. 8.10.3 Search Historical Events In the Event Search module of the event center page, you can search the historical events via time, device type, and other conditions according to the specified device type, and then process the events.
  • Page 148 DS-K1T671 Series Face Recognition Terminal User Manual All the device types, and you can set the following filter conditions: group, priority, and status. Video Intercom For the events of video intercom, you need to select searching scope: All Record and Only Unlocking.
  • Page 149 DS-K1T671 Series Face Recognition Terminal User Manual Figure 8-12 Customize Event Related Items to be Displayed 5. Optional: Handle the event(s). - Handle single event: Select one event that need to be processed, and then click Handle in the event information details page, and enter the processing suggestion. - Handle events in a batch: Select the events which need to be processed, and then click Handle in Batch, and enter the processing suggestion.

  • Page 150: Time And Attendance

    DS-K1T671 Series Face Recognition Terminal User Manual 8.11 Time and Attendance The Time and Attendance module provides multiple functionalities to track and monitor when employees start and stop work, and full control of employees working hours such as late arrivals, early departures, time taken on breaks and absenteeism.

  • Page 151: Configure Attendance Check Point

    DS-K1T671 Series Face Recognition Terminal User Manual When you work for a certain period after end-work time on workday, you will reach different overtime level: overtime level 1, overtime level 2 and overtime level 3. You can set different work hour rate for three overtime levels, respectively. Work Hour Rate Work Hour Rate is used to calculate work hours by multiplying it by overtime.
  • Page 152 DS-K1T671 Series Face Recognition Terminal User Manual Add Regular Holiday You can configure a holiday which will take effect annually on regular days during the effective period, such as New Year's Day, Independence Day, Christmas Day, etc. Steps 1. Enter the Time & Attendance module. 2.

  • Page 153: Synchronize Authentication Record To Third-Party Database

    DS-K1T671 Series Face Recognition Terminal User Manual The added holiday will display in the holiday list and calendar. If the date is selected as different holidays, it will be recorded as the first-added holiday. 11. Optional: After adding the holiday, perform one of the following operations. Edit Holiday Click to edit the holiday information.

  • Page 154: Configure Break Time

    DS-K1T671 Series Face Recognition Terminal User Manual Note If you select MySql, you should import the configuration file (libmysql.dll) from local PC. 5. Set the other required parameters of the third-party database, including server IP address, database name, user name and password. 6.

  • Page 155: Add General Timetable

    DS-K1T671 Series Face Recognition Terminal User Manual The fixed break duration will be excluded from work hours. Must Check The break duration will be calculated and excluded from work hours according to actual check-in and check-out time. Note If you select Must Check as calculation method, you need to set attendance status for late or early returning from break.
  • Page 156 DS-K1T671 Series Face Recognition Terminal User Manual Figure 8-13 Add Timetable 3. Create a name for the timetable. Note You can click the color icon beside the name to customize the color for the valid timetable on the time bar in the Configuration Result area. 4.

  • Page 157: Add Shift

    DS-K1T671 Series Face Recognition Terminal User Manual Note This function should be supported by the device. 7. Set the related attendance time parameters as the following: Start/End-Work Time Set the start-work time and end-work-time. Valid Check-in/out Time On the time bar, adjust the yellow bar to set the timetable during which the check-in or check-out is valid.
  • Page 158 DS-K1T671 Series Face Recognition Terminal User Manual Before You Start Add a timetable first. See Add General Timetable for details. Steps 1. Click Time & Attendance → Shift to enter shift settings page. 2. Click Add to enter Add Shift page. 3.
  • Page 159 DS-K1T671 Series Face Recognition Terminal User Manual Figure 8-15 Add Multiple Timetables 6. Click Save. The added shift lists on the left panel of the page. At most 64 shifts can be added. 7. Optional: Assign the shift to organization or person for a quick shift schedule. 1) Click Assign.

  • Page 160: Manage Shift Schedule

    DS-K1T671 Series Face Recognition Terminal User Manual 8.11.4 Manage Shift Schedule Shift work is an employment practice designed to make use of all 24 hours of the clock each day of the week. The practice typically sees the day divided into shifts, set periods of time during which different shifts perform their duties.
  • Page 161 DS-K1T671 Series Face Recognition Terminal User Manual Persons in this schedule do not need to check-in when they come to work. Check-out Not Required Persons in this schedule do not need to check-out when they end work. Scheduled on Holidays On the holidays, this schedule is still effective and the persons needs to go to work according to the schedule.
  • Page 162 DS-K1T671 Series Face Recognition Terminal User Manual Check-in Not Required Persons in this schedule do not need to check-in when they come to work. Check-out Not Required Persons in this schedule do not need to check-out when they end work. Scheduled on Holidays On the holidays, this schedule is still effective and the persons needs to go to work according to the schedule.

  • Page 163: Manually Correct Check-In/Out Record

    DS-K1T671 Series Face Recognition Terminal User Manual effective in any of the three timetables. If the person checks in at 07:50, it will apply the nearest timetable 08:00 to 15:00 to the person's attendance. Rule Set other rule for the schedule, such as Check-in Not Required, andCheck-out Not Required. 6.

  • Page 164: Add Leave And Business Trip

    DS-K1T671 Series Face Recognition Terminal User Manual Note You can click to add multiple check in/out items. At most 8 check-in/out items can be supported. 6. Optional: Enter the remark information as desired. 7. Click Save. 8. Optional: After adding the check-in/out correction, perform one of the following operations. View Click to view the added attendance handling information in calendar or list...

  • Page 165: Calculate Attendance Data

    DS-K1T671 Series Face Recognition Terminal User Manual 6. Set the time for leave. 7. Optional: Enter the remark information as desired. 8. Click Save. 9. Optional: After adding the leave and business trip, perform one of the following operations. View Click to view the added attendance handling information in calendar or list mode.

  • Page 166: Attendance Statistics

    DS-K1T671 Series Face Recognition Terminal User Manual Manually Calculate Attendance Data You can calculate the attendance data manually by setting the data range. Steps 1. Enter the Time & Attendance module. 2. Click Attendance Statistics → Calculation . 3. Set the start time and end time to define the attendance data range. 4.

  • Page 167: Generate Instant Report

    DS-K1T671 Series Face Recognition Terminal User Manual Note • The client will automatically calculate the previous day's attendance data at 1:00 am on the next day. • Keep the client running at 1:00 am or it cannot calculate the previous day's attendance data automatically.
  • Page 168 DS-K1T671 Series Face Recognition Terminal User Manual 5. Set the start time and end time during which the attendance data will be displayed in the report. 6. Click Report to generate the statistics report and open it. Send Report Regularly The client supports multiple report types and you can pre-define the report content and it can send the report automatically to the email address you configured.
  • Page 169 DS-K1T671 Series Face Recognition Terminal User Manual Note Make sure the attendance records are calculated before the sending time. You can calculate the attendance data manually, or set the schedule so that the client can calculate the data automatically every day. For details, refer to Calculate Attendance Data . 4) Enter the receiver email address(es).

  • Page 170: Appendix A. Tips For Scanning Fingerprint

    DS-K1T671 Series Face Recognition Terminal User Manual Appendix A. Tips for Scanning Fingerprint Recommended Finger Forefinger, middle finger or the third finger. Correct Scanning The figure displayed below is the correct way to scan your finger: You should press your finger on the scanner horizontally. The center of your scanned finger should align with the scanner center.
  • Page 171 DS-K1T671 Series Face Recognition Terminal User Manual Others If your fingerprint is shallow, or it is hard to scan your fingerprint, we recommend you to use other authentication methods. If you have injuries on the scanned finger, the scanner may not recognize. You can change another finger and try again.

  • Page 172: Appendix B. Tips When Collecting/Comparing Face Picture

    DS-K1T671 Series Face Recognition Terminal User Manual Appendix B. Tips When Collecting/Comparing Face Picture The position when collecting or comparing face picture is as below: Positions (Recommended Distance: 0.5 m) Expression • Keep your expression naturally when collecting or comparing face pictures, just like the expression in the picture below.
  • Page 173 DS-K1T671 Series Face Recognition Terminal User Manual...

  • Page 174: Appendix C. Tips For Installation Environment

    DS-K1T671 Series Face Recognition Terminal User Manual Appendix C. Tips for Installation Environment 1. Light Source Illumination Reference Value Candle: 10Lux Bulb: 100~850Lux Sunlight: More than 1200Lux 2. Install the device at least 2 meters away from the light, and at least 3 meters away from the window or door.

  • Page 175: Appendix D. Dimension

    DS-K1T671 Series Face Recognition Terminal User Manual Appendix D. Dimension Device with Fingerprint Module Figure D-1 Device with Fingerprint Module...
  • Page 176 DS-K1T671 Series Face Recognition Terminal User Manual Device without Fingerprint Module Figure D-2 Device without Fingerprint Module...

  • Page 177: Appendix E. Communication Matrix And Device Command

    Figure E-1 QR Code of Communication Matrix Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices.
  • Page 178 DS-K1T671 Series Face Recognition Terminal User Manual Figure E-2 Device Command...
  • Page 179 UD15654B-A...

This manual is also suitable for:

Ds-k1t671 seriesDs-k1t671mfDs-k1t671tmDs-k1t671tmwDs-k1t671tmfDs-k1t671tmfw

Table of Contents