TVS Jupiter BS-VI Owner's Manual page 61

6. Wipe out the oil traces with a clean cloth to
prevent dust accumulation.
7 . Assemble back the gauge oil level.
TRANSMISSION OIL - LEVEL
Check the transmission oil level periodically. To check
the transmission oil level follow the procedure given
below:
1. Place the vehicle on centre stand on a flat surface.
2. Wipe-off the surroundings of oil level screw.
3. Remove the transmission oil level screw along
with a gasket from the rear end of crankcase L.
4. Check for the flow of oil from oil level hole. If
the level is less (if there is no oil flow), top-up
with 'TVS TRU4 SKUUTA oil (SAE 10W30 API-SL,
JASO MB)' till the oil just starts to flow out from
the oil level hole.
5. Wipe out the oil traces with a clean cloth to
prevent dust accumulation.
6. Replace the fiber washer while reassembling the
oil level screw.
Caution
If the vehicle is driven with less engine and transmission
oil, the engine components will be severely damaged.
Check the oil level as per the schedule to avoid costly
damage. Do not fill excess oil may cause oil leak. Always
use 'TVS TRU4 SKUUTA oil (SAE 10W30 API-SL, JASO
MB)' only.
45
45