TVS Jupiter BS-VI Owner's Manual page 37

3. Left hand brake lever (SBT brake lever)
Synchronised Braking Technology (SBT) can be
operated by pressing the left hand brake lever gently
towards the handle grip.
SBT technology helps to operate both front and rear
brakes by distributing the force optimally between
the two braking system.
4. Parking brake (rear brake lock lever)
Brake lock protects your scooter from rolling-off,
when parked on side stand (or) helps you relax while
waiting in a long traffic signal (or) a slope.
To activate brake lock, press the brake lever almost
half towards the grip and hold, then press the parking
brake lever to maximum and release the brake lever
slowly. Ensure the brake is locked properly. Pressing
the brake lever further releases the brake lock
automatically.
Warning
Since your vehicle is fitted with SBT brake system it is
essential to maintain the brake system in good condition.
Adjust the brakes system at regular intervals for the
proper working of SBT.
Ensure release the brake lock before riding the vehicle.
5. High/low beam cum pass-by switch
The head lamp glows automatically once the
engine is started. Only the head lamp beam (high
/ low) can be controlled by pressing the 'high /
low beam' switch.
Press the switch towards '
high beam or press it towards '
lamp low beam.
TVS Jupiter ZX has a combined switch for head lamp
'high / low beam' and 'pass-by' operation. To operate
the 'pass-by', keep the switch in 'low beam' position,
press gently and release. This makes the head lamp
high beam to flash and signal the approaching vehicle.
The pass-by signal can be used while overtaking
during day time.
Warning
Use appropriate head lamp beam 'high / low' as per
the traffic and road conditions for your safety and
to avoid inconvenience to other riders. It is strongly
recommended to ride the vehicle in 'low beam' during
day.
' to operate head lamp
' to operate head
21
21