TVS Scooty Zest User Manual page 57

6. Reverse the procedure for reassembling, while
ensuring the proper seating of brake panel slot in
the fork leg L lug (LH side) and hub drive lugs in
the slots of wheel hub (RH side).
REAR WHEEL REMOVAL
1. Place the vehicle on the centre stand.
2. Hold the rear brake firmly and remove the wheel
mounting nut (A) along with a washer.
1
Always make sure, whenever the wheel is removed, the
axle nuts are tightened properly to the specified torque.
44
3. Slightly tilt the vehicle and take out the wheel
from the rear axle.
4. Reassemble the wheel in the reverse order
of removal. Hold the rear brake firmly while
re-tightening the mounting nut for easy locking
of wheel.