TVS Scooty Zest User Manual page 52

5. If any clearance is found, turn the adjuster nut
(2) at the bottom side in the slot marked as "S"
in clockwise direction until there is no clearance
between the bullet bottom (3) and the slot bottom
(4).
5
1
2
Clearance Clearance
6. After adjusting the bottom adjuster nut, if any
clearance is observed between the bullet top (5)
and the slot top (6) marked as "I" as shown, then
turn the adjuster nut (2) in anti-clockwise until
there is no clearance.
7 . Once again check and confirm the brake play at
the lever end.
6
I
S
Since the vehicle is fitted with Synchronised Braking
System (SBS) adjust the brakes with additional care. If
not it may result in brakes not working properly. Please
contact TVS Motor Company Authorised Main Dealer or
Authorised Dealer for any further assistance.
39