TVS Scooty Zest User Manual page 46

While connecting the terminals, observe the correct
polarity. Connect the red wire to the '+' terminal and
black wire to the '-' terminal of the battery.
Incase of any abnormality or for removal of battery
from the vehicle, contact TVS Motor Company
Authorised Main Dealer / Authorised Dealer.
Never check the battery charge by shorting the terminals.
Always connect the positive terminal first (red wire)
and then negative (black wire) to avoid sparking. The
inversion of the battery wires can damage the battery
and the recharging system.
FUSE
Non-working of electrical systems may be due to
safety fuse failure. Short circuit or overload in the
electrical system are the main causes for the fuse
failure.
A fuse case having 10 Amps fuse (blade type) is fitted
on the front left side of the utility box below seat.
Follow the procedure for the removal, inspection and
replacement of the fuse.
1. Open the seat as explained in page No. 16.
2. Take out the fuse case from the utility box.
3. Open the fuse case and pull out the blown fuse.
33