Fuse Replacement; To Access The Fuses Located Below The Seat; To Access The Fuse Located Below Cover Frame; Good Fuse - TVS Apache RTR 160 BS-VI Owner's Manual

FUSE REPLACEMENT

The electrical components of your motorcycle are
protected by four fuses. Out of which three fuses are
housed inside a fuse box and located below the seat
assembly (at right side). One fuse is located below
the cover frame above the battery.

To access the fuses located below the seat :

1. Turn 'OFF' the ignition.
2. Park the motorcycle on a flat firm surface and
remove the seat assembly as explained in page
No. 33.
3. Open the fuse box lid.
A

Good Fuse

4. The fuse box contains two 10A fuses, one 15A
fuse and one 5A fuse. Out of this, one 10A fuse is
used for ABS system while the other one is used
for EMS system. 15A fuse used for DC loads and
the 5A fuse is used for ABS system again. Use
the 'fuse puller' (A) placed near the fuse box to
pull out the blown fuse.
5. Replace the blown fuse with a new one with
same rating (extra fuses are provided inside the
fuse case itself).
6. Close the fuse box lid and fix back the seat
assembly.

To access the fuse located below cover frame :

1. Remove the cover frame R as explained in page
No. 32.
2. Pull out and open the fuse holder (B). Take out the
blown fuse (Main fuse - 25A).
Blown Fuse
47
47