7.5 Resetting address data (coefficients)
If accurate address data is lost due to replacing the AJDP
phenomena such as static electricity, then follow the procedure below to re-set the
data.
address
7.5.1 Location for where to attach
the original data sheet
7.5.2 How to read the data sheet
Tuning fork No.
Changing the entered data only at KERN possible.
PNJ_PNS-SH-e-2011
Program No.
board and
circuit
* When the mechanical unit is
replaced, new data sheet
shall cover the old one.
Data sheet
Address from the left: 00 to 09
Address from the left: 0A to 13
Address from the left: 14 to 1D
Address from the left: 1E to 27
Address from the left: 28 to 31
Address from the left: 32 to 3B
Address from the left: 3C to 45
Address from the left: 46 to 4F
Address from the left: 50 to 59
Address from the left: 5A to 5E
- 18 -