Safety Symbols; Environmental Conditions - UMF Medical 4040-650 Owner's Manual

IMPORTANT INFORMATION
Safety First: This equipment must be operated and maintained with the safety of the patient and doctor in mind.
1. Read this manual before operating your new UMF Medical equipment.
2. This product is intended to be used for positioning of patients during medical examinations conducted by qualified medical
personnel.
3. This manual should remain permanently affixed or near the equipment for convenient reference.
4. UMF Medical reserves the right to make changes to the design of products at any time and without notice.
CLASSIFICATIONS
Equipment Class – Class I
Protection against electric shock: Type B applied parts
Protection against harmful ingress of water: Ordinary Equipment is not suitable for
use in the presence of a flammable anesthetics mixture with air or with oxygen or
with nitrous oxide
Mode of Operation: Continuous operation with intermittent loading 1 minute on 9
minutes off or 2 minutes on, 18 minutes off.
This product has been evaluated with respect to electrical shock, fire, & mechanical
hazards only, in accordance with UL60601-1 and CAN/CSA-22.2 No. 601.1

SAFETY SYMBOLS

WARNING:
The warning symbol identifies special
instructions or procedures, which if not
correctly followed could result in personal
injury.
UL CLASSIFICATION MARK WITH RESPECT TO ELECTRIC SHOCK, FIRE AND MECHANICAL HAZARDS ONLY IN
ACCORDANCE WITH UL60601-1.
ATTENTION, CONSULT ACCOMPANYING DOCUMENTS
TYPE B APPLIED PART

ENVIRONMENTAL CONDITIONS

TRANSPORT/STORAGE TEMPERATURE: -20ºC to 40ºC
TRANSPORT/STORAGE/OPERATING HUMIDITY: 95% maximum
OPERATING TEMPERATURE: 0ºC to 40ºC
3-00077-0318A
CAUTION:
The caution symbol identifies special
instructions or procedures, which if not
properly followed could result in danger
or damage to equipment.
4040
9
650LBS/295KG
Page 2